Updating and upgrading Bareos
Bareos consists of 4 main components:
Bareos Director
Bareos Storage Daemon
Bareos File Daemon
Bareos WebUI
Before updating or upgrading Bareos software
We consider both operations usually safe and they can be applied without restriction to all installations. The Bareos project avoids breaking changes as far as possible, so usually existing configurations will work with newer installations without changes. Especially when updating the Bareos Director (together with the corresponding Bareos Storage Daemon) it is recommended to do a number of security steps before going ahead:
Read the Bareos current release notes and watch out for changes that might impact your installation. Take special care for the Breaking Changes paragraph, as it contains the information about changes that require your special attention when upgrading your installation as they might require adaptions of the configuration.
Update your operating system to the latest security and patch level of the publisher.
Empty the running jobs queue.
Run BackupCatalog or equivalent as last job (keep the most up to date database dump & configuration state).
Stop all Bareos daemons.
If not done before
Save a copy of the actual configuration used. (Usually
/etc/bareos/and/etc/bareos-webui/.Dump your database content to an easy to restore format.
Cleanup the working dir
/var/lib/bareosRemove any old crash traces
*.bactraceand*.tracebackfiles.Remove any left debugging
*.tracefiles.Remove any leftover
*.mailthat have not been sent.Remove any
*core*that are left behind.
Rotate log files if you don’t use logrotate
/var/log/bareos/bareos.log/var/log/bareos/bareos-audit.log
Now you can safely apply the update or upgrade.
Warning
Please remind, that Bareos Director and Bareos Storage Daemon must always have the same version. The version of the Bareos File Daemon may differ.
Note
When you change the repository and refresh it, it is likely to have a new signing key. You will have to accept it.
Backup Archiving Recovery Open Sourced (EL_8) 1.6 MB/s | 1.6 kB 00:00
Importing GPG key 0xC9FED482:
Userid : "Bareos 21 Signing Key <signing@bareos.com>"
Fingerprint: 91DA 1DC3 564A E20A 76C4 CA88 E019 57D6 C9FE D482
From : /etc/pki/rpm-gpg/RPM-GPG-KEY-bareos-release-21
Is this ok [y/N]: y
Forcing raw metadata refresh
New repository or package signing key received:
Repository: bareos
Key Fingerprint: 91DA 1DC3 564A E20A 76C4 CA88 E019 57D6 C9FE D482
Key Name: Bareos 21 Signing Key <signing@bareos.com>
Key Algorithm: RSA 4096
Key Created: Mon Dec 20 10:04:50 2021
Key Expires: (does not expire)
Rpm Name: gpg-pubkey-c9fed482-61c05542
Note: Signing data enables the recipient to verify that no modifications occurred after the data
were signed. Accepting data with no, wrong or unknown signature can lead to a corrupted system
and in extreme cases even to a system compromise.
Note: A GPG pubkey is clearly identified by its fingerprint. Do not rely on the key's name. If
you are not sure whether the presented key is authentic, ask the repository provider or check
their web site. Many providers maintain a web page showing the fingerprints of the GPG keys they
are using.
Do you want to reject the key, trust temporarily, or trust always? [r/t/a/?] (r): a
Updating from community to subscription binaries
To update the installed community packages (https://download.bareos.org) to Bareos Subscription packages, you will have to point to the subscription repositories located at https://download.bareos.com/.
Once you received your download.bareos.com portal/repository credentials, you can refer to the following section Decide about the Bareos release to use for complete instructions how-to use the add_bareos_repositories.sh helper.
Choose the same operating system and Bareos major version you are already using.
Read the Bareos current release notes to check all fixes that have been made.
Proceed to the next section, to install last minor bugfix release on your systems.
Updating Bareos to the lastest minor or bugfix release
In most cases, a Bareos update is simply done by a package update of the distribution.
Note
Please before processing, apply steps in Before updating or upgrading Bareos software
In this section, we explain how to update your Bareos major version to the latest minor or bugfix release.
For upgrading to a new major version see Update Bareos to a new major release.
Note
You can install directly the latest Major,Minor,Bugfix release available. So updating from 21.0.0 directly to 21.1.5 is not a problem.
Example how to update from 21.0.0 to 21.1.5.
root@host:~# dnf upgrade --repo=bareos --refresh
Backup Archiving Recovery Open Sourced (EL_8) .5 kB/s | 833 B 00:00
Dependencies resolved.
===================================================================================
Package Architecture Version Repository Size
===================================================================================
Upgrading:
bareos x86_64 21.1.5-3.el8 bareos 7.4 k
bareos-bconsole x86_64 21.1.5-3.el8 bareos 37 k
bareos-client x86_64 21.1.5-3.el8 bareos 7.5 k
bareos-common x86_64 21.1.5-3.el8 bareos 764 k
bareos-database-common x86_64 21.1.5-3.el8 bareos 87 k
bareos-database-postgresql x86_64 21.1.5-3.el8 bareos 42 k
bareos-database-tools x86_64 21.1.5-3.el8 bareos 107 k
bareos-director x86_64 21.1.5-3.el8 bareos 425 k
bareos-filedaemon x86_64 21.1.5-3.el8 bareos 120 k
bareos-storage x86_64 21.1.5-3.el8 bareos 97 k
bareos-tools x86_64 21.1.5-3.el8 bareos 52 k
Transaction Summary
===================================================================================
Upgrade 11 Packages
Total download size: 1.7 M
Is this ok [y/N]: y
root@host:~# zypper refresh --force bareos
root@host:~# zypper -v update --repo=bareos
Verbosity: 2
Initializing Target
Checking whether to refresh metadata for bareos
Retrieving: repomd.xml ..........................................[done (3.0 KiB/s)]
Retrieving: media ......................................................[not found]
Retrieving: repomd.xml.asc ..................................................[done]
Retrieving: repomd.xml.key ..................................................[done]
Retrieving: repomd.xml ......................................................[done]
Repository: bareos
Key Fingerprint: 91DA 1DC3 564A E20A 76C4 CA88 E019 57D6 C9FE D482
Key Name: Bareos 21 Signing Key <signing@bareos.com>
Key Algorithm: RSA 4096
Key Created: Mon Dec 20 10:04:50 2021
Key Expires: (does not expire)
Rpm Name: gpg-pubkey-c9fed482-61c05542
Retrieving: 7c2078b9b802f0f5c4edb818e870be0084ae132b4a5f21111617582fd927a65f-primary.xml.gz ...[done]
Retrieving repository 'bareos' metadata .....................................[done]
Building repository 'bareos' cache ..........................................[done]
Loading repository data...
Reading installed packages...
Force resolution: No
The following 10 packages are going to be upgraded:
bareos 21.0.0-4 -> 21.1.5-3
bareos-bconsole 21.0.0-4 -> 21.1.5-3
bareos-client 21.0.0-4 -> 21.1.5-3
bareos-common 21.0.0-4 -> 21.1.5-3
bareos-database-common 21.0.0-4 -> 21.1.5-3
bareos-database-postgresql 21.0.0-4 -> 21.1.5-3
bareos-database-tools 21.0.0-4 -> 21.1.5-3
bareos-director 21.0.0-4 -> 21.1.5-3
bareos-filedaemon 21.0.0-4 -> 21.1.5-3
bareos-storage 21.0.0-4 -> 21.1.5-3
10 packages to upgrade.
Overall download size: 1.5 MiB.
Already cached: 0 B.
After the operation, additional 59.6 KiB will be used.
Continue? [y/n/v/...? shows all options] (y): y
root@host:~# apt update
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian-security bullseye-security InRelease
Hit:3 http://deb.debian.org/debian bullseye-updates InRelease
Get:4 https://download.bareos.com/bareos/release/21/Debian_11 InRelease [1861 B]
Get:5 https://download.bareos.com/bareos/release/21/Debian_11 Sources [5660 B]
Get:6 https://download.bareos.com/bareos/release/21/Debian_11 Packages [36.0 kB]
Fetched 43.5 kB in 1s (42.3 kB/s)
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
15 packages can be upgraded. Run 'apt list --upgradable' to see them.
root@host:~# apt upgrade
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Calculating upgrade... Done
The following packages will be upgraded:
bareos bareos-bconsole bareos-client bareos-common bareos-database-common
bareos-database-postgresql bareos-database-tools bareos-director bareos-filedaemon
bareos-storage bareos-tools libgssapi-krb5-2 libk5crypto3 libkrb5-3
libkrb5support0
15 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 2557 kB of archives.
After this operation, 114 kB of additional disk space will be used.
Do you want to continue? [Y/n] Y
root@host:~# pkg update --repository Bareos
root@host:~# pkg upgrade --repository Bareos
Updating Bareos repository catalogue...
Bareos repository is up to date.
All repositories are up to date.
Checking for upgrades (8 candidates): 100%
Processing candidates (8 candidates): 100%
The following 8 package(s) will be affected (of 0 checked):
Installed packages to be UPGRADED:
bareos.com-bconsole: 21.0.0 -> 21.1.5 [Bareos]
bareos.com-common: 21.0.0 -> 21.1.5 [Bareos]
bareos.com-database-common: 21.0.0 -> 21.1.5 [Bareos]
bareos.com-database-postgresql: 21.0.0 -> 21.1.5 [Bareos]
bareos.com-database-tools: 21.0.0 -> 21.1.5 [Bareos]
bareos.com-director: 21.0.0 -> 21.1.5 [Bareos]
bareos.com-filedaemon: 21.0.0 -> 21.1.5 [Bareos]
bareos.com-storage: 21.0.0 -> 21.1.5 [Bareos]
Number of packages to be upgraded: 8
1 MiB to be downloaded.
Proceed with this action? [y/N]: y
Post update checks
After the update, it is recommended to check if any new warnings are raised when starting the daemon, mostly deprecated configuration directives. Bareos will mark configuration directives at least for one major release as deprecated, before removing them.
To do so you can use the -t flag:
root@host:~# bareos-fd -t
root@host:~# su - bareos -s /bin/sh -c "bareos-sd -t"
root@host:~# su - bareos -s /bin/sh -c "bareos-dir -t"
There are configuration warnings:
* using deprecated keyword CollectStatistics on line 8 of file /etc/bareos/bareos-dir.d/storage/File.conf
The same warnings are also shown on a regular start of the daemons.
Depending of the operating system and its configuration, you will have to restart the daemons. Use your operating system command to do so.
root@host:~# systemctl restart bareos-director bareos-storage bareos-filedaemon
root@host:~# systemctl status bareos-director bareos-storage bareos-filedaemon
root@host:~# service bareos-dir restart
root@host:~# service bareos-fd restart
root@host:~# service bareos-sd restart
Upgrading Bareos to a new major release
In most cases, a Bareos major upgrade can be achieved by:
Add new major repository (subscription only)
Package upgrade of the distribution.
Database schema upgrade with helper scripts (if schema was changed).
Configuration review to cleanup deprecated or removed parameters.
Review of home made scripts and manage their adaptation in case of changes.
It is generally sufficient to upgrade directly to the latest release, without having to install any intermediate releases. However, it is required to read the release notes of all intermediate releases.
One exception is when using a MySQL Bareos catalog, which have been removed with Bareos Version >= 21.0.0. Therefore you first have to upgrade to Bareos 20 and migrate the MySQL into a PostgreSQL Bareos Catalog, see Migrate a Bareos Catalog from MySQL to PostgreSQL.
Prepare the upgrade
If you not have already done those steps, please refer to instructions in Before updating or upgrading Bareos software.
Warning
If you use any third party plugins, you should check and test their functionalities with the new major version beforehand.
Upgrade the Bareos download repositories
This does only apply for subscription repositories (https://download.bareos.com/bareos/release/). The community repository (https://download.bareos.org/current) will always contain the latest build of the most recent stable branch.
First remove the existing Bareos repository definitions, by either removing the definition file(s) or by using your package manager.
Point your browser to the new Bareos major version for your operating system on the download server.
Open or save the helper script
add_bareos_repositories.sh.You can refer to the following section Decide about the Bareos release to use for complete instructions how to use the
add_bareos_repositories.shhelper.
Transfer the file to your Bareos server, and execute it as root. This will create (or depending on your OS update) the Bareos repository information.
root@host:~# sh add_bareos_repositories.sh
You should be able now to proceed the appropriate commands to refresh the packages list and upgrade the package to the newer version.
Note
You can refer to section Updating Bareos to the lastest minor or bugfix release for commands example.
Updating the configuration files
When updating Bareos through the distribution packaging mechanism, the existing configuration files are kept as they are.
However, configuration files installed by Bareos packages that have been manually removed by the user will get reinstalled by the package, see Resource file conventions.
If you don’t want to modify the behavior, there is normally no need to modify the configuration.
However, in some rare cases, configuration changes are required. These cases are described in the Release Notes.
With Bareos version >= 16.2.4 the default configuration uses the Subdirectory Configuration Scheme.
This scheme offers various improvements. However, if your are updating from earlier versions, your existing single configuration files (/etc/bareos/bareos-*.conf) stay in place and are contentiously used by Bareos.
The new default configuration resource files will also be installed (/etc/bareos/bareos-*.d/*/*.conf).
However, they will only be used, when the legacy configuration file does not exist.
See Updates from Bareos < 16.2.4 for details and how to migrate to Subdirectory Configuration Scheme.
Updating the database scheme
Sometimes improvements in Bareos make it necessary to update the database scheme.
Warning
If the Bareos catalog database does not have the current schema, the Bareos Director refuses to start.
root@host:~# su - bareos -s /bin/sh -c "bareos-dir -t"
bareos-dir: dird/check_catalog.cc:64-0 Could not open Catalog "MyCatalog", database "bareos".
bareos-dir: dird/check_catalog.cc:71-0 Version error for database "bareos". Wanted 2210, got 2192
bareos-dir ERROR TERMINATION
Please correct the configuration in /etc/bareos/bareos-dir.d/*/*.conf
Detailed information can then be found in the log file /var/log/bareos/bareos.log.
Take a look into the Release Notes to see which Bareos updates do require a database scheme update.
Warning
Especially the upgrade to Bareos >= 17.2.0 restructures the File database table. In larger installations this is very time consuming (up to several hours or days) and temporarily doubles the amount of required database disk space.
Debian based Linux Distributions
Since Bareos Version >= 14.2.0 the Debian (and Ubuntu) based packages support the dbconfig-common mechanism to create and update the Bareos database. If this is properly configured, the database schema will be automatically adapted by the Bareos packages.
For details see dbconfig-common (Debian).
If you disabled the usage of dbconfig-common, follow the instructions for Other Platforms.
Other Platforms
This has to be done as database administrator. On most platforms Bareos knows only about the credentials to access the Bareos database, but not about the database administrator credentials to modify the database schema.
The task of updating the database schema is done by the scripts /usr/lib/bareos/scripts/update_bareos_tables and /usr/lib/bareos/scripts/grant_bareos_privileges.
However, this script requires administration access to the database. Depending on your distribution, this requires different preparations.
More details can be found in chapter Catalog Maintenance.
su postgres -c /usr/lib/bareos/scripts/update_bareos_tables
su postgres -c /usr/lib/bareos/scripts/grant_bareos_privileges
The grant_bareos_privileges command is required, if new databases tables are introduced. It does not hurt to run it multiple times.
After this, restart the Bareos Director and verify it starts without problems.