# Director Configuration¶

Of all the configuration files needed to run Bareos, the Director’s is the most complicated and the one that you will need to modify the most often as you add clients or modify the FileSets.

For a general discussion of configuration files and resources including the recognized data types see Customizing the Configuration.

Everything revolves around a job and is tied to a job in one way or another.

The Bareos Director knows about following resource types:

• Director Resource – to define the Director’s name and its access password used for authenticating the Console program. Only a single Director resource definition may appear in the Director’s configuration file.
• Job Resource – to define the backup/restore Jobs and to tie together the Client, FileSet and Schedule resources to be used for each Job. Normally, you will Jobs of different names corresponding to each client (i.e. one Job per client, but a different one with a different name for each client).
• JobDefs Resource – optional resource for providing defaults for Job resources.
• Schedule Resource – to define when a Job has to run. You may have any number of Schedules, but each job will reference only one.
• FileSet Resource – to define the set of files to be backed up for each Client. You may have any number of FileSets but each Job will reference only one.
• Client Resource – to define what Client is to be backed up. You will generally have multiple Client definitions. Each Job will reference only a single client.
• Storage Resource – to define on what physical device the Volumes should be mounted. You may have one or more Storage definitions.
• Pool Resource – to define the pool of Volumes that can be used for a particular Job. Most people use a single default Pool. However, if you have a large number of clients or volumes, you may want to have multiple Pools. Pools allow you to restrict a Job (or a Client) to use only a particular set of Volumes.
• Catalog Resource – to define in what database to keep the list of files and the Volume names where they are backed up. Most people only use a single catalog. It is possible, however not adviced and not supported to use multiple catalogs, see Multiple Catalogs.
• Messages Resource – to define where error and information messages are to be sent or logged. You may define multiple different message resources and hence direct particular classes of messages to different users or locations (files, …).

## Director Resource¶

The Director resource defines the attributes of the Directors running on the network. Only a single Director resource is allowed.

The following is an example of a valid Director resource definition:

Director Resource example
Director {
Name = bareos-dir
QueryFile = "/etc/bareos/query.sql"
Maximum Concurrent Jobs = 10
Messages = Daemon
}

configuration directive name type of data default value remark
Absolute Job Timeout (Dir->Director) = PINT32
Audit Events (Dir->Director) = AUDIT_COMMAND_LIST
Auditing (Dir->Director) = BOOLEAN no
Backend Directory (Dir->Director) = DIRECTORY_LIST /usr/lib/bareos/backends (platform specific)
Description (Dir->Director) = STRING
Dir Address (Dir->Director) = ADDRESS 9101
Dir Addresses (Dir->Director) = ADDRESSES 9101
Dir Port (Dir->Director) = PORT 9101
Dir Source Address (Dir->Director) = ADDRESS 0
FD Connect Timeout (Dir->Director) = TIME 180
Heartbeat Interval (Dir->Director) = TIME 0
Key Encryption Key (Dir->Director) = AUTOPASSWORD
Log Timestamp Format (Dir->Director) = STRING
Maximum Concurrent Jobs (Dir->Director) = PINT32 1
Maximum Connections (Dir->Director) = PINT32 30
Maximum Console Connections (Dir->Director) = PINT32 20
Messages (Dir->Director) = RES
Name (Dir->Director) = NAME   required
NDMP Log Level (Dir->Director) = PINT32 4
NDMP Snooping (Dir->Director) = BOOLEAN
Optimize For Size (Dir->Director) = BOOLEAN no
Optimize For Speed (Dir->Director) = BOOLEAN no
Password (Dir->Director) = AUTOPASSWORD   required
Pid Directory (Dir->Director) = DIRECTORY /var/lib/bareos (platform specific)
Plugin Directory (Dir->Director) = DIRECTORY
Plugin Names (Dir->Director) = PLUGIN_NAMES
Query File (Dir->Director) = DIRECTORY   required
Scripts Directory (Dir->Director) = DIRECTORY
SD Connect Timeout (Dir->Director) = TIME 1800
Secure Erase Command (Dir->Director) = STRING
Statistics Collect Interval (Dir->Director) = PINT32 150
Statistics Retention (Dir->Director) = TIME 160704000
Subscriptions (Dir->Director) = PINT32 0
TLS Allowed CN (Dir->Director) = STRING_LIST
TLS Authenticate (Dir->Director) = BOOLEAN no
TLS CA Certificate Dir (Dir->Director) = DIRECTORY
TLS CA Certificate File (Dir->Director) = DIRECTORY
TLS Certificate (Dir->Director) = DIRECTORY
TLS Certificate Revocation List (Dir->Director) = DIRECTORY
TLS Cipher List (Dir->Director) = DIRECTORY
TLS DH File (Dir->Director) = DIRECTORY
TLS Enable (Dir->Director) = BOOLEAN yes
TLS Key (Dir->Director) = DIRECTORY
TLS Protocol (Dir->Director) = STRING
TLS Require (Dir->Director) = BOOLEAN no
TLS Verify Peer (Dir->Director) = BOOLEAN no
Ver Id (Dir->Director) = STRING
Working Directory (Dir->Director) = DIRECTORY /var/lib/bareos (platform specific)
Absolute Job Timeout
Type: PINT32 14.2.0
Audit Events
Type: AUDIT_COMMAND_LIST 14.2.0

Specify which commands (see Console Commands) will be audited. If nothing is specified (and Auditing (Dir->Director) is enabled), all commands will be audited.

Auditing
Type: BOOLEAN no 14.2.0

This directive allows to en- or disable auditing of interaction with the Bareos Director. If enabled, audit messages will be generated. The messages resource configured in Messages (Dir->Director) defines, how these messages are handled.

Backend Directory
Type: DIRECTORY_LIST /usr/lib/bareos/backends (platform specific)

This directive specifies a list of directories from where the Bareos Director loads his dynamic backends.

Description
Type: STRING

The text field contains a description of the Director that will be displayed in the graphical user interface. This directive is optional.

Dir Address

This directive is optional, but if it is specified, it will cause the Director server (for the Console program) to bind to the specified address. If this and the Dir Addresses (Dir->Director) directives are not specified, the Director will bind to both IPv6 and IPv4 default addresses (the default).

Dir Addresses

Specify the ports and addresses on which the Director daemon will listen for Bareos Console connections.

Please note that if you use the Dir Addresses (Dir->Director) directive, you must not use either a Dir Port (Dir->Director) or a Dir Address (Dir->Director) directive in the same resource.

Dir Port
Type: PORT 9101

Specify the port on which the Director daemon will listen for Bareos Console connections. This same port number must be specified in the Director resource of the Console configuration file. This directive should not be used if you specify Dir Addresses (Dir->Director) (N.B plural) directive.

By default, the Director will listen to both IPv6 and IPv4 default addresses on the port you set. If you want to listen on either IPv4 or IPv6 only, you have to specify it with either Dir Address (Dir->Director), or remove Dir Port (Dir->Director)and just use Dir Addresses (Dir->Director)instead.

Dir Source Address

This record is optional, and if it is specified, it will cause the Director server (when initiating connections to a storage or file daemon) to source its connections from the specified address. Only a single IP address may be specified. If this record is not specified, the Director server will source its outgoing connections according to the system routing table (the default).

FD Connect Timeout
Type: TIME 180

where time is the time that the Director should continue attempting to contact the File daemon to start a job, and after which the Director will cancel the job.

Heartbeat Interval
Type: TIME 0

This directive is optional and if specified will cause the Director to set a keepalive interval (heartbeat) in seconds on each of the sockets it opens for the Client resource. This value will override any specified at the Director level. It is implemented only on systems that provide the setsockopt TCP_KEEPIDLE function (Linux, …). The default value is zero, which means no change is made to the socket.

Key Encryption Key

This key is used to encrypt the Security Key that is exchanged between the Director and the Storage Daemon for supporting Application Managed Encryption (AME). For security reasons each Director should have a different Key Encryption Key.

Log Timestamp Format
Type: STRING 15.2.3
Maximum Concurrent Jobs
Type: PINT32 1

This directive specifies the maximum number of total Director Jobs that should run concurrently.

The Volume format becomes more complicated with multiple simultaneous jobs, consequently, restores may take longer if Bareos must sort through interleaved volume blocks from multiple simultaneous jobs. This can be avoided by having each simultaneous job write to a different volume or by using data spooling, which will first spool the data to disk simultaneously, then write one spool file at a time to the volume thus avoiding excessive interleaving of the different job blocks.

Maximum Connections
Type: PINT32 30
Maximum Console Connections
Type: PINT32 20

This directive specifies the maximum number of Console Connections that could run concurrently.

Messages
Type: RES

The messages resource specifies where to deliver Director messages that are not associated with a specific Job. Most messages are specific to a job and will be directed to the Messages resource specified by the job. However, there are a messages that can occur when no job is running.

Name
Required: True NAME

The name of the resource.

The director name used by the system administrator.

NDMP Log Level
Type: PINT32 4 13.2.0

This directive sets the loglevel for the NDMP protocol library.

NDMP Snooping
Type: BOOLEAN 13.2.0

This directive enables the Snooping and pretty printing of NDMP protocol information in debugging mode.

Optimize For Size
Type: BOOLEAN no

If set to yes this directive will use the optimizations for memory size over speed. So it will try to use less memory which may lead to a somewhat lower speed. Its currently mostly used for keeping all hardlinks in memory.

If none of Optimize For Size (Dir->Director) and Optimize For Speed (Dir->Director) is enabled, Optimize For Size (Dir->Director) is enabled by default.

Optimize For Speed
Type: BOOLEAN no

If set to yes this directive will use the optimizations for speed over the memory size. So it will try to use more memory which lead to a somewhat higher speed. Its currently mostly used for keeping all hardlinks in memory. Its relates to the Optimize For Size (Dir->Director) option set either one to yes as they are mutually exclusive.

Password

Specifies the password that must be supplied for the default Bareos Console to be authorized. This password correspond to Password (Console->Director) of the Console configuration file.

Pid Directory
Type: DIRECTORY /var/lib/bareos (platform specific)

This directive is optional and specifies a directory in which the Director may put its process Id file. The process Id file is used to shutdown Bareos and to prevent multiple copies of Bareos from running simultaneously. Standard shell expansion of the Directory is done when the configuration file is read so that values such as $HOME will be properly expanded. The PID directory specified must already exist and be readable and writable by the Bareos daemon referencing it. Typically on Linux systems, you will set this to: /var/run. If you are not installing Bareos in the system directories, you can use the Working Directory as defined above. Plugin Directory Type: DIRECTORY 14.2.0 Plugins are loaded from this directory. To load only specific plugins, use ‘Plugin Names’. Plugin Names Type: PLUGIN_NAMES 14.2.0 List of plugins, that should get loaded from ‘Plugin Directory’ (only basenames, ‘-dir.so’ is added automatically). If empty, all plugins will get loaded. Query File Required: True DIRECTORY This directive is required and specifies a directory and file in which the Director can find the canned SQL statements for the query command. Scripts Directory Type: DIRECTORY This directive is currently unused. SD Connect Timeout Type: TIME 1800 where time is the time that the Director should continue attempting to contact the Storage daemon to start a job, and after which the Director will cancel the job. Secure Erase Command Type: STRING 15.2.1 Specify command that will be called when bareos unlinks files. When files are no longer needed, Bareos will delete (unlink) them. With this directive, it will call the specified command to delete these files. See Secure Erase Command for details. Statistics Collect Interval Type: PINT32 150 14.2.0 Bareos offers the possibility to collect statistic information from its connected devices. To do so, Collect Statistics (Dir->Storage) must be enabled. This interval defines, how often the Director connects to the attached Storage Daemons to collect the statistic information. Statistics Retention Type: TIME 160704000 The Statistics Retention directive defines the length of time that Bareos will keep statistics job records in the Catalog database after the Job End time (in the catalog JobHisto table). When this time period expires, and if user runs prune stats command, Bareos will prune (remove) Job records that are older than the specified period. Theses statistics records aren’t use for restore purpose, but mainly for capacity planning, billings, etc. See chapter Job Statistics for additional information. Subscriptions Type: PINT32 0 12.4.4 In case you want check that the number of active clients don’t exceed a specific number, you can define this number here and check with the status subscriptions command. However, this is only intended to give a hint. No active limiting is implemented. TLS Allowed CN Type: STRING_LIST “Common Name”s (CNs) of the allowed peer certificates. TLS Authenticate Type: BOOLEAN no Use TLS only to authenticate, not for encryption. TLS CA Certificate Dir Type: DIRECTORY Path of a TLS CA certificate directory. TLS CA Certificate File Type: DIRECTORY Path of a PEM encoded TLS CA certificate(s) file. TLS Certificate Type: DIRECTORY Path of a PEM encoded TLS certificate. TLS Certificate Revocation List Type: DIRECTORY Path of a Certificate Revocation List file. TLS Cipher List Type: DIRECTORY List of valid TLS Ciphers. TLS DH File Type: DIRECTORY Path to PEM encoded Diffie-Hellman parameter file. If this directive is specified, DH key exchange will be used for the ephemeral keying, allowing for forward secrecy of communications. TLS Enable Type: BOOLEAN yes Enable TLS support. Bareos can be configured to encrypt all its network traffic. See chapter TLS Configuration Directives to see, how the Bareos Director (and the other components) must be configured to use TLS. TLS Key Type: DIRECTORY Path of a PEM encoded private key. It must correspond to the specified “TLS Certificate”. TLS Protocol Type: STRING 20.0.0 OpenSSL Configuration: Protocol TLS Require Type: BOOLEAN no Without setting this to yes, Bareos can fall back to use unencrypted connections. Enabling this implicitly sets “TLS Enable = yes”. TLS Verify Peer Type: BOOLEAN no If disabled, all certificates signed by a known CA will be accepted. If enabled, the CN of a certificate must the Address or in the “TLS Allowed CN” list. Ver Id Type: STRING where string is an identifier which can be used for support purpose. This string is displayed using the version command. Working Directory Type: DIRECTORY /var/lib/bareos (platform specific) This directive is optional and specifies a directory in which the Director may put its status files. This directory should be used only by Bareos but may be shared by other Bareos daemons. Standard shell expansion of the directory is done when the configuration file is read so that values such as $HOME

will be properly expanded.

The working directory specified must already exist and be readable and writable by the Bareos daemon referencing it.

## Job Resource¶

The Job resource defines a Job (Backup, Restore, …) that Bareos must perform. Each Job resource definition contains the name of a Client and a FileSet to backup, the Schedule for the Job, where the data are to be stored, and what media Pool can be used. In effect, each Job resource must specify What, Where, How, and When or FileSet, Storage, Backup/Restore/Level, and Schedule respectively. Note, the FileSet must be specified for a restore job for historical reasons, but it is no longer used.

Only a single type (Backup, Restore, …) can be specified for any job. If you want to backup multiple FileSets on the same Client or multiple Clients, you must define a Job for each one.

Note, you define only a single Job to do the Full, Differential, and Incremental backups since the different backup levels are tied together by a unique Job name. Normally, you will have only one Job per Client, but if a client has a really huge number of files (more than several million), you might want to split it into several Jobs each with a different FileSet covering only parts of the total files.

Multiple Storage daemons are not currently supported for Jobs, if you do want to use multiple storage daemons, you will need to create a different Job and ensure the combination of Client and FileSet is unique.

Warning

Bareos uses only Client (Dir->Job) and Fileset (Dir->Job) to determine which jobids belong together. If job A and B have the same client and fileset defined, the resulting jobids will be intermixed as follows:

1. When a job determines its predecessor to determine its required level and since-time, it will consider all jobs with the same client and fileset.
2. When restoring a client you select the fileset and all jobs that used that fileset will be considered.

As a matter of fact, if you want separate backups, you have to duplicate your filesets with a different name and the same content.

configuration directive name type of data default value remark
Accurate (Dir->Job) = BOOLEAN no
Add Prefix (Dir->Job) = STRING
Add Suffix (Dir->Job) = STRING
Allow Duplicate Jobs (Dir->Job) = BOOLEAN yes
Allow Higher Duplicates (Dir->Job) = BOOLEAN yes
Allow Mixed Priority (Dir->Job) = BOOLEAN no
Always Incremental (Dir->Job) = BOOLEAN no
Always Incremental Job Retention (Dir->Job) = TIME 0
Always Incremental Keep Number (Dir->Job) = PINT32 0
Always Incremental Max Full Age (Dir->Job) = TIME
Backup Format (Dir->Job) = STRING Native
Base (Dir->Job) = RESOURCE_LIST
Bootstrap (Dir->Job) = DIRECTORY
Cancel Lower Level Duplicates (Dir->Job) = BOOLEAN no
Cancel Queued Duplicates (Dir->Job) = BOOLEAN no
Cancel Running Duplicates (Dir->Job) = BOOLEAN no
Catalog (Dir->Job) = RES
Client (Dir->Job) = RES
Client Run After Job (Dir->Job) = RUNSCRIPT_SHORT
Client Run Before Job (Dir->Job) = RUNSCRIPT_SHORT
Description (Dir->Job) = STRING
Differential Backup Pool (Dir->Job) = RES
Differential Max Runtime (Dir->Job) = TIME
Dir Plugin Options (Dir->Job) = STRING_LIST
Enabled (Dir->Job) = BOOLEAN yes
FD Plugin Options (Dir->Job) = STRING_LIST
File History Size (Dir->Job) = SIZE64 10000000
File Set (Dir->Job) = RES
Full Backup Pool (Dir->Job) = RES
Full Max Runtime (Dir->Job) = TIME
Incremental Backup Pool (Dir->Job) = RES
Incremental Max Runtime (Dir->Job) = TIME
Job Defs (Dir->Job) = RES
Job To Verify (Dir->Job) = RES
Level (Dir->Job) = BACKUP_LEVEL
Max Concurrent Copies (Dir->Job) = PINT32 100
Max Diff Interval (Dir->Job) = TIME
Max Full Consolidations (Dir->Job) = PINT32 0
Max Full Interval (Dir->Job) = TIME
Max Run Sched Time (Dir->Job) = TIME
Max Run Time (Dir->Job) = TIME
Max Start Delay (Dir->Job) = TIME
Max Virtual Full Interval (Dir->Job) = TIME
Max Wait Time (Dir->Job) = TIME
Maximum Bandwidth (Dir->Job) = SPEED
Maximum Concurrent Jobs (Dir->Job) = PINT32 1
Messages (Dir->Job) = RES   required
Name (Dir->Job) = NAME   required
Next Pool (Dir->Job) = RES
Pool (Dir->Job) = RES   required
Prefer Mounted Volumes (Dir->Job) = BOOLEAN yes
Prefix Links (Dir->Job) = BOOLEAN no
Priority (Dir->Job) = PINT32 10
Protocol (Dir->Job) = PROTOCOL_TYPE Native
Prune Files (Dir->Job) = BOOLEAN no
Prune Jobs (Dir->Job) = BOOLEAN no
Prune Volumes (Dir->Job) = BOOLEAN no
Purge Migration Job (Dir->Job) = BOOLEAN no
Regex Where (Dir->Job) = STRING
Replace (Dir->Job) = REPLACE_OPTION Always
Rerun Failed Levels (Dir->Job) = BOOLEAN no
Reschedule Interval (Dir->Job) = TIME 1800
Reschedule On Error (Dir->Job) = BOOLEAN no
Reschedule Times (Dir->Job) = PINT32 5
Run (Dir->Job) = STRING_LIST
Run After Failed Job (Dir->Job) = RUNSCRIPT_SHORT
Run After Job (Dir->Job) = RUNSCRIPT_SHORT
Run Before Job (Dir->Job) = RUNSCRIPT_SHORT
Run On Incoming Connect Interval (Dir->Job) = TIME 0
Run Script (Dir->Job) { RUNSCRIPT }
Save File History (Dir->Job) = BOOLEAN yes
Schedule (Dir->Job) = RES
SD Plugin Options (Dir->Job) = STRING_LIST
Selection Pattern (Dir->Job) = STRING
Selection Type (Dir->Job) = MIGRATION_TYPE
Spool Attributes (Dir->Job) = BOOLEAN no
Spool Data (Dir->Job) = BOOLEAN no
Spool Size (Dir->Job) = SIZE64
Storage (Dir->Job) = RESOURCE_LIST
Strip Prefix (Dir->Job) = STRING
Type (Dir->Job) = JOB_TYPE   required
Verify Job (Dir->Job) = RES   alias
Virtual Full Backup Pool (Dir->Job) = RES
Where (Dir->Job) = DIRECTORY
Write Bootstrap (Dir->Job) = DIRECTORY_OR_COMMAND
Write Verify List (Dir->Job) = DIRECTORY
Accurate
Type: BOOLEAN no
In accurate mode, the File daemon knowns exactly which files were present after the last backup. So it is able to handle deleted or renamed files.

When restoring a FileSet for a specified date (including “most recent”), Bareos is able to restore exactly the files and directories that existed at the time of the last backup prior to that date including ensuring that deleted files are actually deleted, and renamed directories are restored properly.

When doing VirtualFull backups, it is advised to use the accurate mode, otherwise the VirtualFull might contain already deleted files.

However, using the accurate mode has also disadvantages:

• The File daemon must keep data concerning all files in memory. So If you do not have sufficient memory, the backup may either be terribly slow or fail. For 500.000 files (a typical desktop linux system), it will require approximately 64 Megabytes of RAM on your File daemon to hold the required information.
Add Prefix
Type: STRING

This directive applies only to a Restore job and specifies a prefix to the directory name of all files being restored. This will use File Relocation feature.

Add Suffix
Type: STRING

This directive applies only to a Restore job and specifies a suffix to all files being restored. This will use File Relocation feature.

Using Add Suffix=.old, /etc/passwd will be restored to /etc/passwsd.old

Allow Duplicate Jobs
Type: BOOLEAN yes

A duplicate job in the sense we use it here means a second or subsequent job with the same name starts. This happens most frequently when the first job runs longer than expected because no tapes are available.

If this directive is enabled duplicate jobs will be run. If the directive is set to no then only one job of a given name may run at one time. The action that Bareos takes to ensure only one job runs is determined by the directives

If none of these directives is set to yes, Allow Duplicate Jobs is set to no and two jobs are present, then the current job (the second one started) will be cancelled.

Virtual backup jobs of a consolidation are not affected by the directive. In those cases the directive is going to be ignored.

Allow Higher Duplicates
Type: BOOLEAN yes
Allow Mixed Priority
Type: BOOLEAN no

When set to yes, this job may run even if lower priority jobs are already running. This means a high priority job will not have to wait for other jobs to finish before starting. The scheduler will only mix priorities when all running jobs have this set to true.

Note that only higher priority jobs will start early. Suppose the director will allow two concurrent jobs, and that two jobs with priority 10 are running, with two more in the queue. If a job with priority 5 is added to the queue, it will be run as soon as one of the running jobs finishes. However, new priority 10 jobs will not be run until the priority 5 job has finished.

Always Incremental
Type: BOOLEAN no 16.2.4

Enable/disable always incremental backup scheme.

Always Incremental Job Retention
Type: TIME 0 16.2.4

Backup Jobs older than the specified time duration will be merged into a new Virtual backup.

Always Incremental Keep Number
Type: PINT32 0 16.2.4

Guarantee that at least the specified number of Backup Jobs will persist, even if they are older than “Always Incremental Job Retention”.

Always Incremental Max Full Age
Type: TIME 16.2.4

If “AlwaysIncrementalMaxFullAge” is set, during consolidations only incremental backups will be considered while the Full Backup remains to reduce the amount of data being consolidated. Only if the Full Backup is older than “AlwaysIncrementalMaxFullAge”, the Full Backup will be part of the consolidation to avoid the Full Backup becoming too old .

Backup Format
Type: STRING Native

The backup format used for protocols which support multiple formats. By default, it uses the Bareos Native Backup format. Other protocols, like NDMP supports different backup formats for instance:

• Dump
• Tar
• SMTape
Base
Type: RESOURCE_LIST

The Base directive permits to specify the list of jobs that will be used during Full backup as base. This directive is optional. See the Base Job chapter for more information.

Bootstrap
Type: DIRECTORY

The Bootstrap directive specifies a bootstrap file that, if provided, will be used during Restore Jobs and is ignored in other Job types. The bootstrap file contains the list of tapes to be used in a restore Job as well as which files are to be restored. Specification of this directive is optional, and if specified, it is used only for a restore job. In addition, when running a Restore job from the console, this value can be changed.

If you use the restore command in the Console program, to start a restore job, the bootstrap file will be created automatically from the files you select to be restored.

For additional details see The Bootstrap File chapter.

Cancel Lower Level Duplicates
Type: BOOLEAN no

If Allow Duplicate Jobs (Dir->Job) is set to no and this directive is set to yes, Bareos will choose between duplicated jobs the one with the highest level. For example, it will cancel a previous Incremental to run a Full backup. It works only for Backup jobs. If the levels of the duplicated jobs are the same, nothing is done and the directives Cancel Queued Duplicates (Dir->Job) and Cancel Running Duplicates (Dir->Job) will be examined.

Cancel Queued Duplicates
Type: BOOLEAN no

If Allow Duplicate Jobs (Dir->Job) is set to no and if this directive is set to yes any job that is already queued to run but not yet running will be canceled.

Cancel Running Duplicates
Type: BOOLEAN no

If Allow Duplicate Jobs (Dir->Job) is set to no and if this directive is set to yes any job that is already running will be canceled.

Catalog
Type: RES 13.4.0

This specifies the name of the catalog resource to be used for this Job. When a catalog is defined in a Job it will override the definition in the client.

Client
Type: RES

The Client directive specifies the Client (File daemon) that will be used in the current Job. Only a single Client may be specified in any one Job. The Client runs on the machine to be backed up, and sends the requested files to the Storage daemon for backup, or receives them when restoring. For additional details, see the Client Resource of this chapter. This directive is required For versions before 13.3.0, this directive is required for all Jobtypes. For Version >= 13.3.0 it is required for all Jobtypes but Copy or Migrate jobs.

Client Run After Job
Type: RUNSCRIPT_SHORT

This is a shortcut for the Run Script (Dir->Job) resource, that run on the client after a backup job.

Client Run Before Job
Type: RUNSCRIPT_SHORT

This is basically a shortcut for the Run Script (Dir->Job) resource, that run on the client before the backup job.

Warning

For compatibility reasons, with this shortcut, the command is executed directly when the client receive it. And if the command is in error, other remote runscripts will be discarded. To be sure that all commands will be sent and executed, you have to use Run Script (Dir->Job) syntax.

Description
Type: STRING
Differential Backup Pool
Type: RES

The Differential Backup Pool specifies a Pool to be used for Differential backups. It will override any Pool (Dir->Job) specification during a Differential backup.

Differential Max Runtime
Type: TIME

The time specifies the maximum allowed time that a Differential backup job may run, counted from when the job starts (not necessarily the same as when the job was scheduled).

Dir Plugin Options
Type: STRING_LIST

These settings are plugin specific, see Director Plugins.

Enabled
Type: BOOLEAN yes

En- or disable this resource.

This directive allows you to enable or disable automatic execution via the scheduler of a Job.

FD Plugin Options
Type: STRING_LIST

These settings are plugin specific, see File Daemon Plugins.

File History Size
Type: SIZE64 10000000 15.2.4

When using NDMP and Save File History (Dir->Job) is enabled, this directives controls the size of the internal temporary database (LMDB) to translate NDMP file and directory information into Bareos file and directory information.

File History Size must be greater the number of directories + files of this NDMP backup job.

Warning

This uses a large memory mapped file (File History Size * 256 => around 2,3 GB for the File History Size = 10000000). On 32-bit systems or if a memory limit for the user running the Bareos Director (normally bareos) exists (verify by su - bareos -s /bin/sh -c "ulimit -a"), this may fail.

File Set
Type: RES

The FileSet directive specifies the FileSet that will be used in the current Job. The FileSet specifies which directories (or files) are to be backed up, and what options to use (e.g. compression, …). Only a single FileSet resource may be specified in any one Job. For additional details, see the FileSet Resource section of this chapter. This directive is required (For versions before 13.3.0 for all Jobtypes and for versions after that for all Jobtypes but Copy and Migrate).

Full Backup Pool
Type: RES

The Full Backup Pool specifies a Pool to be used for Full backups. It will override any Pool (Dir->Job) specification during a Full backup.

Full Max Runtime
Type: TIME

The time specifies the maximum allowed time that a Full backup job may run, counted from when the job starts (not necessarily the same as when the job was scheduled).

Incremental Backup Pool
Type: RES

The Incremental Backup Pool specifies a Pool to be used for Incremental backups. It will override any Pool (Dir->Job) specification during an Incremental backup.

Incremental Max Runtime
Type: TIME

The time specifies the maximum allowed time that an Incremental backup job may run, counted from when the job starts, (not necessarily the same as when the job was scheduled).

Job Defs
Type: RES

If a Job Defs resource name is specified, all the values contained in the named Job Defs resource will be used as the defaults for the current Job. Any value that you explicitly define in the current Job resource, will override any defaults specified in the Job Defs resource. The use of this directive permits writing much more compact Job resources where the bulk of the directives are defined in one or more Job Defs. This is particularly useful if you have many similar Jobs but with minor variations such as different Clients. To structure the configuration even more, Job Defs themselves can also refer to other Job Defs.

Job To Verify
Type: RES
Level
Type: BACKUP_LEVEL

The Level directive specifies the default Job level to be run. Each different Type (Dir->Job) (Backup, Restore, Verify, …) has a different set of Levels that can be specified. The Level is normally overridden by a different value that is specified in the Schedule Resource. This directive is not required, but must be specified either by this directive or as an override specified in the Schedule Resource.

Backup

For a Backup Job, the Level may be one of the following:

Full
When the Level is set to Full all files in the FileSet whether or not they have changed will be backed up.
Incremental

When the Level is set to Incremental all files specified in the FileSet that have changed since the last successful backup of the the same Job using the same FileSet and Client, will be backed up. If the Director cannot find a previous valid Full backup then the job will be upgraded into a Full backup. When the Director looks for a valid backup record in the catalog database, it looks for a previous Job with:

• The same Job name.
• The same Client name.
• The same FileSet (any change to the definition of the FileSet such as adding or deleting a file in the Include or Exclude sections constitutes a different FileSet.
• The Job was a Full, Differential, or Incremental backup.
• The Job terminated normally (i.e. did not fail or was not canceled).
• The Job started no longer ago than Max Full Interval.

If all the above conditions do not hold, the Director will upgrade the Incremental to a Full save. Otherwise, the Incremental backup will be performed as requested.

The File daemon (Client) decides which files to backup for an Incremental backup by comparing start time of the prior Job (Full, Differential, or Incremental) against the time each file was last “modified” (st_mtime) and the time its attributes were last “changed”(st_ctime). If the file was modified or its attributes changed on or after this start time, it will then be backed up.

Some virus scanning software may change st_ctime while doing the scan. For example, if the virus scanning program attempts to reset the access time (st_atime), which Bareos does not use, it will cause st_ctime to change and hence Bareos will backup the file during an Incremental or Differential backup. In the case of Sophos virus scanning, you can prevent it from resetting the access time (st_atime) and hence changing st_ctime by using the –no-reset-atime option. For other software, please see their manual.

When Bareos does an Incremental backup, all modified files that are still on the system are backed up. However, any file that has been deleted since the last Full backup remains in the Bareos catalog, which means that if between a Full save and the time you do a restore, some files are deleted, those deleted files will also be restored. The deleted files will no longer appear in the catalog after doing another Full save.

In addition, if you move a directory rather than copy it, the files in it do not have their modification time (st_mtime) or their attribute change time (st_ctime) changed. As a consequence, those files will probably not be backed up by an Incremental or Differential backup which depend solely on these time stamps. If you move a directory, and wish it to be properly backed up, it is generally preferable to copy it, then delete the original.

However, to manage deleted files or directories changes in the catalog during an Incremental backup you can use Accurate mode. This is quite memory consuming process.

Differential

When the Level is set to Differential all files specified in the FileSet that have changed since the last successful Full backup of the same Job will be backed up. If the Director cannot find a valid previous Full backup for the same Job, FileSet, and Client, backup, then the Differential job will be upgraded into a Full backup. When the Director looks for a valid Full backup record in the catalog database, it looks for a previous Job with:

• The same Job name.
• The same Client name.
• The same FileSet (any change to the definition of the FileSet such as adding or deleting a file in the Include or Exclude sections constitutes a different FileSet.
• The Job was a FULL backup.
• The Job terminated normally (i.e. did not fail or was not canceled).
• The Job started no longer ago than Max Full Interval.

If all the above conditions do not hold, the Director will upgrade the Differential to a Full save. Otherwise, the Differential backup will be performed as requested.

The File daemon (Client) decides which files to backup for a differential backup by comparing the start time of the prior Full backup Job against the time each file was last “modified” (st_mtime) and the time its attributes were last “changed” (st_ctime). If the file was modified or its attributes were changed on or after this start time, it will then be backed up. The start time used is displayed after the Since on the Job report. In rare cases, using the start time of the prior backup may cause some files to be backed up twice, but it ensures that no change is missed.

When Bareos does a Differential backup, all modified files that are still on the system are backed up. However, any file that has been deleted since the last Full backup remains in the Bareos catalog, which means that if between a Full save and the time you do a restore, some files are deleted, those deleted files will also be restored. The deleted files will no longer appear in the catalog after doing another Full save. However, to remove deleted files from the catalog during a Differential backup is quite a time consuming process and not currently implemented in Bareos. It is, however, a planned future feature.

As noted above, if you move a directory rather than copy it, the files in it do not have their modification time (st_mtime) or their attribute change time (st_ctime) changed. As a consequence, those files will probably not be backed up by an Incremental or Differential backup which depend solely on these time stamps. If you move a directory, and wish it to be properly backed up, it is generally preferable to copy it, then delete the original. Alternatively, you can move the directory, then use the touch program to update the timestamps.

However, to manage deleted files or directories changes in the catalog during an Differential backup you can use Accurate mode. This is quite memory consuming process. See for more details.

Every once and a while, someone asks why we need Differential backups as long as Incremental backups pickup all changed files. There are possibly many answers to this question, but the one that is the most important for me is that a Differential backup effectively merges all the Incremental and Differential backups since the last Full backup into a single Differential backup. This has two effects: 1. It gives some redundancy since the old backups could be used if the merged backup cannot be read. 2. More importantly, it reduces the number of Volumes that are needed to do a restore effectively eliminating the need to read all the volumes on which the preceding Incremental and Differential backups since the last Full are done.

VirtualFull

When the Level is set to VirtualFull, a new Full backup is generated from the last existing Full backup and the matching Differential- and Incremental-Backups. It matches this according the Name (Dir->Client) and Name (Dir->Fileset). This means, a new Full backup get created without transfering all the data from the client to the backup server again. The new Full backup will be stored in the pool defined in Next Pool (Dir->Pool).

Warning

Opposite to the other backup levels, VirtualFull may require read and write access to multiple volumes. In most cases you have to make sure, that Bareos does not try to read and write to the same Volume.

Restore
For a Restore Job, no level needs to be specified.
Verify

For a Verify Job, the Level may be one of the following:

InitCatalog
does a scan of the specified FileSet and stores the file attributes in the Catalog database. Since no file data is saved, you might ask why you would want to do this. It turns out to be a very simple and easy way to have a Tripwire like feature using Bareos. In other words, it allows you to save the state of a set of files defined by the FileSet and later check to see if those files have been modified or deleted and if any new files have been added. This can be used to detect system intrusion. Typically you would specify a FileSet that contains the set of system files that should not change (e.g. /sbin, /boot, /lib, /bin, …). Normally, you run the InitCatalog level verify one time when your system is first setup, and then once again after each modification (upgrade) to your system. Thereafter, when your want to check the state of your system files, you use a Verify level = Catalog. This compares the results of your InitCatalog with the current state of the files.
Catalog

Compares the current state of the files against the state previously saved during an InitCatalog. Any discrepancies are reported. The items reported are determined by the verify options specified on the Include directive in the specified FileSet (see the FileSet resource below for more details). Typically this command will be run once a day (or night) to check for any changes to your system files.

Warning

If you run two Verify Catalog jobs on the same client at the same time, the results will certainly be incorrect. This is because Verify Catalog modifies the Catalog database while running in order to track new files.

VolumeToCatalog

This level causes Bareos to read the file attribute data written to the Volume from the last backup Job for the job specified on the VerifyJob directive. The file attribute data are compared to the values saved in the Catalog database and any differences are reported. This is similar to the DiskToCatalog level except that instead of comparing the disk file attributes to the catalog database, the attribute data written to the Volume is read and compared to the catalog database. Although the attribute data including the signatures (MD5 or SHA1) are compared, the actual file data is not compared (it is not in the catalog).

VolumeToCatalog jobs require a client to extract the metadata, but this client does not have to be the original client. We suggest to use the client on the backup server itself for maximum performance.

Warning

If you run two Verify VolumeToCatalog jobs on the same client at the same time, the results will certainly be incorrect. This is because the Verify VolumeToCatalog modifies the Catalog database while running.

Limitation: Verify VolumeToCatalog does not check file checksums

When running a Verify VolumeToCatalog job the file data will not be checksummed and compared with the recorded checksum. As a result, file data errors that are introduced between the checksumming in the Bareos File Daemon and the checksumming of the block by the Bareos Storage Daemon will not be detected.

DiskToCatalog

This level causes Bareos to read the files as they currently are on disk, and to compare the current file attributes with the attributes saved in the catalog from the last backup for the job specified on the VerifyJob directive. This level differs from the VolumeToCatalog level described above by the fact that it doesn’t compare against a previous Verify job but against a previous backup. When you run this level, you must supply the verify options on your Include statements. Those options determine what attribute fields are compared.

This command can be very useful if you have disk problems because it will compare the current state of your disk against the last successful backup, which may be several jobs.

Note, the current implementation does not identify files that have been deleted.

Max Concurrent Copies
Type: PINT32 100
Max Diff Interval
Type: TIME

The time specifies the maximum allowed age (counting from start time) of the most recent successful Differential backup that is required in order to run Incremental backup jobs. If the most recent Differential backup is older than this interval, Incremental backups will be upgraded to Differential backups automatically. If this directive is not present, or specified as 0, then the age of the previous Differential backup is not considered.

Max Full Consolidations
Type: PINT32 0 16.2.4

If “AlwaysIncrementalMaxFullAge” is configured, do not run more than “MaxFullConsolidations” consolidation jobs that include the Full backup.

Max Full Interval
Type: TIME

The time specifies the maximum allowed age (counting from start time) of the most recent successful Full backup that is required in order to run Incremental or Differential backup jobs. If the most recent Full backup is older than this interval, Incremental and Differential backups will be upgraded to Full backups automatically. If this directive is not present, or specified as 0, then the age of the previous Full backup is not considered.

Max Run Sched Time
Type: TIME

The time specifies the maximum allowed time that a job may run, counted from when the job was scheduled. This can be useful to prevent jobs from running during working hours. We can see it like Max Start Delay + Max Run Time.

Max Run Time
Type: TIME

The time specifies the maximum allowed time that a job may run, counted from when the job starts, (not necessarily the same as when the job was scheduled).

By default, the watchdog thread will kill any Job that has run more than 6 days. The maximum watchdog timeout is independent of Max Run Time and cannot be changed.

Max Start Delay
Type: TIME

The time specifies the maximum delay between the scheduled time and the actual start time for the Job. For example, a job can be scheduled to run at 1:00am, but because other jobs are running, it may wait to run. If the delay is set to 3600 (one hour) and the job has not begun to run by 2:00am, the job will be canceled. This can be useful, for example, to prevent jobs from running during day time hours. The default is no limit.

Max Virtual Full Interval
Type: TIME 14.4.0

The time specifies the maximum allowed age (counting from start time) of the most recent successful Virtual Full backup that is required in order to run Incremental or Differential backup jobs. If the most recent Virtual Full backup is older than this interval, Incremental and Differential backups will be upgraded to Virtual Full backups automatically. If this directive is not present, or specified as 0, then the age of the previous Virtual Full backup is not considered.

Max Wait Time
Type: TIME

The time specifies the maximum allowed time that a job may block waiting for a resource (such as waiting for a tape to be mounted, or waiting for the storage or file daemons to perform their duties), counted from the when the job starts, (not necessarily the same as when the job was scheduled).

Maximum Bandwidth
Type: SPEED

The speed parameter specifies the maximum allowed bandwidth that a job may use.

Maximum Concurrent Jobs
Type: PINT32 1

Specifies the maximum number of Jobs from the current Job resource that can run concurrently. Note, this directive limits only Jobs with the same name as the resource in which it appears. Any other restrictions on the maximum concurrent jobs such as in the Director, Client or Storage resources will also apply in addition to the limit specified here.

For details, see the Concurrent Jobs chapter.

Messages
Required: True RES

The Messages directive defines what Messages resource should be used for this job, and thus how and where the various messages are to be delivered. For example, you can direct some messages to a log file, and others can be sent by email. For additional details, see the Messages Resource Chapter of this manual. This directive is required.

Name
Required: True NAME

The name of the resource.

The Job name. This name can be specified on the Run command in the console program to start a job. If the name contains spaces, it must be specified between quotes. It is generally a good idea to give your job the same name as the Client that it will backup. This permits easy identification of jobs.

When the job actually runs, the unique Job Name will consist of the name you specify here followed by the date and time the job was scheduled for execution. This directive is required.

Next Pool
Type: RES

A Next Pool override used for Migration/Copy and Virtual Backup Jobs.

Pool
Required: True RES

The Pool directive defines the pool of Volumes where your data can be backed up. Many Bareos installations will use only the Default pool. However, if you want to specify a different set of Volumes for different Clients or different Jobs, you will probably want to use Pools. For additional details, see the Pool Resource of this chapter. This directive is required.

In case of a Copy or Migration job, this setting determines what Pool will be examined for finding JobIds to migrate. The exception to this is when Selection Type (Dir->Job) = SQLQuery, and although a Pool directive must still be specified, no Pool is used, unless you specifically include it in the SQL query. Note, in any case, the Pool resource defined by the Pool directive must contain a Next Pool (Dir->Pool) = … directive to define the Pool to which the data will be migrated.

Prefer Mounted Volumes
Type: BOOLEAN yes

If the Prefer Mounted Volumes directive is set to yes, the Storage daemon is requested to select either an Autochanger or a drive with a valid Volume already mounted in preference to a drive that is not ready. This means that all jobs will attempt to append to the same Volume (providing the Volume is appropriate – right Pool, … for that job), unless you are using multiple pools. If no drive with a suitable Volume is available, it will select the first available drive. Note, any Volume that has been requested to be mounted, will be considered valid as a mounted volume by another job. This if multiple jobs start at the same time and they all prefer mounted volumes, the first job will request the mount, and the other jobs will use the same volume.

If the directive is set to no, the Storage daemon will prefer finding an unused drive, otherwise, each job started will append to the same Volume (assuming the Pool is the same for all jobs). Setting Prefer Mounted Volumes to no can be useful for those sites with multiple drive autochangers that prefer to maximize backup throughput at the expense of using additional drives and Volumes. This means that the job will prefer to use an unused drive rather than use a drive that is already in use.

Despite the above, we recommend against setting this directive to no since it tends to add a lot of swapping of Volumes between the different drives and can easily lead to deadlock situations in the Storage daemon. We will accept bug reports against it, but we cannot guarantee that we will be able to fix the problem in a reasonable time.

A better alternative for using multiple drives is to use multiple pools so that Bareos will be forced to mount Volumes from those Pools on different drives.

Type: BOOLEAN no

If a Where path prefix is specified for a recovery job, apply it to absolute links as well. The default is No. When set to Yes then while restoring files to an alternate directory, any absolute soft links will also be modified to point to the new alternate directory. Normally this is what is desired – i.e. everything is self consistent. However, if you wish to later move the files to their original locations, all files linked with absolute names will be broken.

Priority
Type: PINT32 10

This directive permits you to control the order in which your jobs will be run by specifying a positive non-zero number. The higher the number, the lower the job priority. Assuming you are not running concurrent jobs, all queued jobs of priority 1 will run before queued jobs of priority 2 and so on, regardless of the original scheduling order.

The priority only affects waiting jobs that are queued to run, not jobs that are already running. If one or more jobs of priority 2 are already running, and a new job is scheduled with priority 1, the currently running priority 2 jobs must complete before the priority 1 job is run, unless Allow Mixed Priority is set.

If you want to run concurrent jobs you should keep these points in mind:

• See Concurrent Jobs on how to setup concurrent jobs.
• Bareos concurrently runs jobs of only one priority at a time. It will not simultaneously run a priority 1 and a priority 2 job.
• If Bareos is running a priority 2 job and a new priority 1 job is scheduled, it will wait until the running priority 2 job terminates even if the Maximum Concurrent Jobs settings would otherwise allow two jobs to run simultaneously.
• Suppose that bareos is running a priority 2 job and a new priority 1 job is scheduled and queued waiting for the running priority 2 job to terminate. If you then start a second priority 2 job, the waiting priority 1 job will prevent the new priority 2 job from running concurrently with the running priority 2 job. That is: as long as there is a higher priority job waiting to run, no new lower priority jobs will start even if the Maximum Concurrent Jobs settings would normally allow them to run. This ensures that higher priority jobs will be run as soon as possible.

If you have several jobs of different priority, it may not best to start them at exactly the same time, because Bareos must examine them one at a time. If by Bareos starts a lower priority job first, then it will run before your high priority jobs. If you experience this problem, you may avoid it by starting any higher priority jobs a few seconds before lower priority ones. This insures that Bareos will examine the jobs in the correct order, and that your priority scheme will be respected.

Protocol
Type: PROTOCOL_TYPE Native

The backup protocol to use to run the Job. See dtProtocolType.

Prune Files
Type: BOOLEAN no

Normally, pruning of Files from the Catalog is specified on a Client by Client basis in Auto Prune (Dir->Client). If this directive is specified and the value is yes, it will override the value specified in the Client resource.

Prune Jobs
Type: BOOLEAN no

Normally, pruning of Jobs from the Catalog is specified on a Client by Client basis in Auto Prune (Dir->Client). If this directive is specified and the value is yes, it will override the value specified in the Client resource.

Prune Volumes
Type: BOOLEAN no

Normally, pruning of Volumes from the Catalog is specified on a Pool by Pool basis in Auto Prune (Dir->Pool) directive. Note, this is different from File and Job pruning which is done on a Client by Client basis. If this directive is specified and the value is yes, it will override the value specified in the Pool resource.

Purge Migration Job
Type: BOOLEAN no

This directive may be added to the Migration Job definition in the Director configuration file to purge the job migrated at the end of a migration.

Regex Where
Type: STRING

This directive applies only to a Restore job and specifies a regex filename manipulation of all files being restored. This will use File Relocation feature.

Replace
Type: REPLACE_OPTION Always

This directive applies only to a Restore job and specifies what happens when Bareos wants to restore a file or directory that already exists. You have the following options for replace-option:

always
when the file to be restored already exists, it is deleted and then replaced by the copy that was backed up. This is the default value.
if the backed up file (on tape) is newer than the existing file, the existing file is deleted and replaced by the back up.
ifolder
if the backed up file (on tape) is older than the existing file, the existing file is deleted and replaced by the back up.
never
if the backed up file already exists, Bareos skips restoring this file.
Rerun Failed Levels
Type: BOOLEAN no

If this directive is set to yes (default no), and Bareos detects that a previous job at a higher level (i.e. Full or Differential) has failed, the current job level will be upgraded to the higher level. This is particularly useful for Laptops where they may often be unreachable, and if a prior Full save has failed, you wish the very next backup to be a Full save rather than whatever level it is started as.

There are several points that must be taken into account when using this directive: first, a failed job is defined as one that has not terminated normally, which includes any running job of the same name (you need to ensure that two jobs of the same name do not run simultaneously); secondly, the Ignore File Set Changes (Dir->Fileset) directive is not considered when checking for failed levels, which means that any FileSet change will trigger a rerun.

Reschedule Interval
Type: TIME 1800

If you have specified Reschedule On Error = yes and the job terminates in error, it will be rescheduled after the interval of time specified by time-specification. See the time specification formats in the Configure chapter for details of time specifications. If no interval is specified, the job will not be rescheduled on error.

Reschedule On Error
Type: BOOLEAN no

If this directive is enabled, and the job terminates in error, the job will be rescheduled as determined by the Reschedule Interval (Dir->Job) and Reschedule Times (Dir->Job) directives. If you cancel the job, it will not be rescheduled.

This specification can be useful for portables, laptops, or other machines that are not always connected to the network or switched on.

Reschedule Times
Type: PINT32 5

This directive specifies the maximum number of times to reschedule the job. If it is set to zero (the default) the job will be rescheduled an indefinite number of times.

Run
Type: STRING_LIST

The Run directive (not to be confused with the Run option in a Schedule) allows you to start other jobs or to clone the current jobs.

The part after the equal sign must be enclosed in double quotes, and can contain any string or set of options (overrides) that you can specify when entering the run command from the console. For example storage=DDS-4 …. In addition, there are two special keywords that permit you to clone the current job. They are level=%l and since=%s. The %l in the level keyword permits entering the actual level of the current job and the %s in the since keyword permits putting the same time for comparison as used on the current job. Note, in the case of the since keyword, the %s must be enclosed in double quotes, and thus they must be preceded by a backslash since they are already inside quotes. For example:

run = "Nightly-backup level=%l since=\"%s\" storage=DDS-4"


A cloned job will not start additional clones, so it is not possible to recurse.

Jobs started by Run (Dir->Job) are submitted for running before the original job (while it is being initialized). This means that any clone job will actually start before the original job, and may even block the original job from starting. It evens ignores Priority (Dir->Job).

If you are trying to prioritize jobs, you will find it much easier to do using a Run Script (Dir->Job) resource or a Run Before Job (Dir->Job) directive.

Run After Failed Job
Type: RUNSCRIPT_SHORT

This is a shortcut for the Run Script (Dir->Job) resource, that runs a command after a failed job.

If the exit code of the program run is non-zero, Bareos will print a warning message.

Run Script {
Command = "echo test"
Runs When = After
Runs On Failure = yes
Runs On Client  = no
Runs On Success = yes    # default, you can drop this line
}

Run After Job
Type: RUNSCRIPT_SHORT

This is a shortcut for the Run Script (Dir->Job) resource, that runs a command after a successful job (without error or without being canceled).

If the exit code of the program run is non-zero, Bareos will print a warning message.

Run Before Job
Type: RUNSCRIPT_SHORT

This is a shortcut for the Run Script (Dir->Job) resource, that runs a command before a job.

If the exit code of the program run is non-zero, the current Bareos job will be canceled.

Run Before Job = "echo test"


is equivalent to:

Run Script {
Command = "echo test"
Runs On Client = No
Runs When = Before
}

Run On Incoming Connect Interval
Type: TIME 0 19.2.4

The interval specifies the time between the most recent successful backup (counting from start time) and the event of a client initiated connection. When this interval is exceeded the job is started automatically.

Run Script
Type: RUNSCRIPT

The RunScript directive behaves like a resource in that it requires opening and closing braces around a number of directives that make up the body of the runscript.

The specified Command (see below for details) is run as an external program prior or after the current Job. This is optional. By default, the program is executed on the Client side like in ClientRunXXXJob.

Console options are special commands that are sent to the director instead of the OS. At this time, console command outputs are redirected to log with the jobid 0.

You can use following console command: delete, disable, enable, estimate, list, llist, memory, prune, purge, release, reload, status, setdebug, show, time, trace, update, version, .client, .jobs, .pool, .storage. See Bareos Console for more information. You need to specify needed information on command line, nothing will be prompted. Example:

Console = "prune files client=\%c"
Console = "update stats age=3"


You can specify more than one Command/Console option per RunScript.

You can use following options may be specified in the body of the runscript:

Options Value Description
Runs On Success Yes | No run if JobStatus is successful
Runs On Failure Yes | No run if JobStatus isn’t successful
Runs On Client Yes | No run command on client
Runs When Never | Before | After | Always | AfterVSS When to run
Fail Job On Error Yes | No Fail job if script returns something different from 0
Command   External command
Console   Console command

Any output sent by the command to standard output will be included in the Bareos job report. The command string must be a valid program name or name of a shell script.

Warning

The command string is parsed then fed to the OS, which means that the path will be searched to execute your specified command, but there is no shell interpretation. As a consequence, if you invoke complicated commands or want any shell features such as redirection or piping, you must call a shell script and do it inside that script. Alternatively, it is possible to use sh -c '...' in the command definition to force shell interpretation, see example below.

Before executing the specified command, Bareos performs character substitution of the following characters:

 %% % %b Job Bytes %B Job Bytes in human readable format %c Client’s name %d Daemon’s name (Such as host-dir or host-fd) %D Director’s name (Also valid on file daemon) %e Job Exit Status %f Job FileSet (Only on director side) %F Job Files %h Client address %i Job Id %j Unique Job Id %l Job Level %n Job name %p Pool name (Only on director side) %P Daemon PID %s Since time %t Job type (Backup, …) %v Read Volume name(s) (Only on director side) %V Write Volume name(s) (Only on director side) %w Storage name (Only on director side) %x Spooling enabled? (“yes” or “no”)

Some character substitutions are not available in all situations. The Job Exit Status code %e edits the following values:

• OK
• Error
• Fatal Error
• Canceled
• Differences
• Unknown term code

Thus if you edit it on a command line, you will need to enclose it within some sort of quotes.

You can use these following shortcuts:

Keyword RunsOnSuccess RunsOnFailure FailJobOnError Runs On Client RunsWhen
Run Before Job (Dir->Job)     Yes No Before
Run After Job (Dir->Job) Yes No   No After
Run After Failed Job (Dir->Job) No Yes   No After
Client Run Before Job (Dir->Job)     Yes Yes Before
Client Run After Job (Dir->Job) Yes No   Yes After

Examples:

Run Script {
RunsWhen = Before
FailJobOnError = No
Command = "/etc/init.d/apache stop"
}

RunScript {
RunsWhen = After
RunsOnFailure = Yes
Command = "/etc/init.d/apache start"
}

RunScript {
RunsWhen = Before
FailJobOnError = Yes
Command = "sh -c 'top -b -n 1 > /var/backup/top.out'"
}


Special Windows Considerations

You can run scripts just after snapshots initializations with AfterVSS keyword.

In addition, for a Windows client, please take note that you must ensure a correct path to your script. The script or program can be a .com, .exe or a .bat file. If you just put the program name in then Bareos will search using the same rules that cmd.exe uses (current directory, Bareos bin directory, and PATH). It will even try the different extensions in the same order as cmd.exe. The command can be anything that cmd.exe or command.com will recognize as an executable file.

However, if you have slashes in the program name then Bareos figures you are fully specifying the name, so you must also explicitly add the three character extension.

The command is run in a Win32 environment, so Unix like commands will not work unless you have installed and properly configured Cygwin in addition to and separately from Bareos.

The System %Path% will be searched for the command. (under the environment variable dialog you have have both System Environment and User Environment, we believe that only the System environment will be available to bareos-fd, if it is running as a service.)

System environment variables can be referenced with %var% and used as either part of the command name or arguments.

So if you have a script in the Bareos bin directory then the following lines should work fine:

        Client Run Before Job = "systemstate"
or
Client Run Before Job = "systemstate.bat"
or
Client Run Before Job = "\"C:/Program Files/Bareos/systemstate.bat\""


The outer set of quotes is removed when the configuration file is parsed. You need to escape the inner quotes so that they are there when the code that parses the command line for execution runs so it can tell what the program name is.

The special characters &<>()@^| will need to be quoted, if they are part of a filename or argument.

If someone is logged in, a blank “command” window running the commands will be present during the execution of the command.

Some Suggestions from Phil Stracchino for running on Win32 machines with the native Win32 File daemon:

1. You might want the ClientRunBeforeJob directive to specify a .bat file which runs the actual client-side commands, rather than trying to run (for example) regedit /e directly.

2. The batch file should explicitly ’exit 0’ on successful completion.

3. The path to the batch file should be specified in Unix form:

Client Run Before Job = "c:/bareos/bin/systemstate.bat"

rather than DOS/Windows form:

INCORRECT: Client Run Before Job = "c:\bareos\bin\systemstate.bat"

For Win32, please note that there are certain limitations:

Client Run Before Job = "C:/Program Files/Bareos/bin/pre-exec.bat"

Lines like the above do not work because there are limitations of cmd.exe that is used to execute the command. Bareos prefixes the string you supply with cmd.exe /c. To test that your command works you should type cmd /c "C:/Program Files/test.exe" at a cmd prompt and see what happens. Once the command is correct insert a backslash () before each double quote (“), and then put quotes around the whole thing when putting it in the director’s .conf file. You either need to have only one set of quotes or else use the short name and don’t put quotes around the command path.

Below is the output from cmd’s help as it relates to the command line passed to the /c option.

If /C or /K is specified, then the remainder of the command line after the switch is processed as a command line, where the following logic is used to process quote (“) characters:

1. If all of the following conditions are met, then quote characters on the command line are preserved:
• no /S switch.
• exactly two quote characters.
• no special characters between the two quote characters, where special is one of: &<>()@^|
• there are one or more whitespace characters between the the two quote characters.
• the string between the two quote characters is the name of an executable file.
2. Otherwise, old behavior is to see if the first character is a quote character and if so, strip the leading character and remove the last quote character on the command line, preserving any text after the last quote character.
Save File History
Type: BOOLEAN yes 14.2.0

Allow disabling storing the file history, as this causes problems problems with some implementations of NDMP (out-of-order metadata).

With File History Size (Dir->Job) the maximum number of files and directories inside a NDMP job can be configured.

Warning

The File History is required to do a single file restore from NDMP backups. With this disabled, only full restores are possible.

Schedule
Type: RES

The Schedule directive defines what schedule is to be used for the Job. The schedule in turn determines when the Job will be automatically started and what Job level (i.e. Full, Incremental, …) is to be run. This directive is optional, and if left out, the Job can only be started manually using the Console program. Although you may specify only a single Schedule resource for any one job, the Schedule resource may contain multiple Run directives, which allow you to run the Job at many different times, and each run directive permits overriding the default Job Level Pool, Storage, and Messages resources. This gives considerable flexibility in what can be done with a single Job. For additional details, see Schedule Resource.

SD Plugin Options
Type: STRING_LIST

These settings are plugin specific, see Storage Daemon Plugins.

Selection Pattern
Type: STRING

Selection Patterns is only used for Copy and Migration jobs, see Migration and Copy. The interpretation of its value depends on the selected Selection Type (Dir->Job).

For the OldestVolume and SmallestVolume, this Selection pattern is not used (ignored).

For the Client, Volume, and Job keywords, this pattern must be a valid regular expression that will filter the appropriate item names found in the Pool.

For the SQLQuery keyword, this pattern must be a valid SELECT SQL statement that returns JobIds.

Selection Type
Type: MIGRATION_TYPE

Selection Type is only used for Copy and Migration jobs, see Migration and Copy. It determines how a migration job will go about selecting what JobIds to migrate. In most cases, it is used in conjunction with a Selection Pattern (Dir->Job) to give you fine control over exactly what JobIds are selected. The possible values are:

SmallestVolume
This selection keyword selects the volume with the fewest bytes from the Pool to be migrated. The Pool to be migrated is the Pool defined in the Migration Job resource. The migration control job will then start and run one migration backup job for each of the Jobs found on this Volume. The Selection Pattern, if specified, is not used.
OldestVolume
This selection keyword selects the volume with the oldest last write time in the Pool to be migrated. The Pool to be migrated is the Pool defined in the Migration Job resource. The migration control job will then start and run one migration backup job for each of the Jobs found on this Volume. The Selection Pattern, if specified, is not used.
Client
The Client selection type, first selects all the Clients that have been backed up in the Pool specified by the Migration Job resource, then it applies the Selection Pattern (Dir->Job) as a regular expression to the list of Client names, giving a filtered Client name list. All jobs that were backed up for those filtered (regexed) Clients will be migrated. The migration control job will then start and run one migration backup job for each of the JobIds found for those filtered Clients.
Volume
The Volume selection type, first selects all the Volumes that have been backed up in the Pool specified by the Migration Job resource, then it applies the Selection Pattern (Dir->Job) as a regular expression to the list of Volume names, giving a filtered Volume list. All JobIds that were backed up for those filtered (regexed) Volumes will be migrated. The migration control job will then start and run one migration backup job for each of the JobIds found on those filtered Volumes.
Job
The Job selection type, first selects all the Jobs (as defined on the Name (Dir->Job) directive in a Job resource) that have been backed up in the Pool specified by the Migration Job resource, then it applies the Selection Pattern (Dir->Job) as a regular expression to the list of Job names, giving a filtered Job name list. All JobIds that were run for those filtered (regexed) Job names will be migrated. Note, for a given Job named, they can be many jobs (JobIds) that ran. The migration control job will then start and run one migration backup job for each of the Jobs found.
SQLQuery
The SQLQuery selection type, used the Selection Pattern (Dir->Job) as an SQL query to obtain the JobIds to be migrated. The Selection Pattern must be a valid SELECT SQL statement for your SQL engine, and it must return the JobId as the first field of the SELECT.
PoolOccupancy
This selection type will cause the Migration job to compute the total size of the specified pool for all Media Types combined. If it exceeds the Migration High Bytes (Dir->Pool) defined in the Pool, the Migration job will migrate all JobIds beginning with the oldest Volume in the pool (determined by Last Write time) until the Pool bytes drop below the Migration Low Bytes (Dir->Pool) defined in the Pool. This calculation should be consider rather approximative because it is made once by the Migration job before migration is begun, and thus does not take into account additional data written into the Pool during the migration. In addition, the calculation of the total Pool byte size is based on the Volume bytes saved in the Volume (Media) database entries. The bytes calculate for Migration is based on the value stored in the Job records of the Jobs to be migrated. These do not include the Storage daemon overhead as is in the total Pool size. As a consequence, normally, the migration will migrate more bytes than strictly necessary.
PoolTime
The PoolTime selection type will cause the Migration job to look at the time each JobId has been in the Pool since the job ended. All Jobs in the Pool longer than the time specified on Migration Time (Dir->Pool) directive in the Pool resource will be migrated.
PoolUncopiedJobs
This selection which copies all jobs from a pool to an other pool which were not copied before is available only for copy Jobs.
Spool Attributes
Type: BOOLEAN no

Is Spool Attributes is disabled, the File attributes are sent by the Storage daemon to the Director as they are stored on tape. However, if you want to avoid the possibility that database updates will slow down writing to the tape, you may want to set the value to yes, in which case the Storage daemon will buffer the File attributes and Storage coordinates to a temporary file in the Working Directory, then when writing the Job data to the tape is completed, the attributes and storage coordinates will be sent to the Director.

NOTE: When Spool Data (Dir->Job) is set to yes, Spool Attributes is also automatically set to yes.

For details, see Data Spooling.

Spool Data
Type: BOOLEAN no

If this directive is set to yes, the Storage daemon will be requested to spool the data for this Job to disk rather than write it directly to the Volume (normally a tape).

Thus the data is written in large blocks to the Volume rather than small blocks. This directive is particularly useful when running multiple simultaneous backups to tape. Once all the data arrives or the spool files’ maximum sizes are reached, the data will be despooled and written to tape.

Spooling data prevents interleaving data from several job and reduces or eliminates tape drive stop and start commonly known as “shoe-shine”.

We don’t recommend using this option if you are writing to a disk file using this option will probably just slow down the backup jobs.

NOTE: When this directive is set to yes, Spool Attributes (Dir->Job) is also automatically set to yes.

For details, see Data Spooling.

Spool Size
Type: SIZE64

This specifies the maximum spool size for this job. The default is taken from Maximum Spool Size (Sd->Device) limit.

Storage
Type: RESOURCE_LIST

The Storage directive defines the name of the storage services where you want to backup the FileSet data. For additional details, see the Storage Resource of this manual. The Storage resource may also be specified in the Job’s Pool resource, in which case the value in the Pool resource overrides any value in the Job. This Storage resource definition is not required by either the Job resource or in the Pool, but it must be specified in one or the other, if not an error will result.

Strip Prefix
Type: STRING

This directive applies only to a Restore job and specifies a prefix to remove from the directory name of all files being restored. This will use the File Relocation feature.

Using Strip Prefix=/etc, /etc/passwd will be restored to /passwd

Under Windows, if you want to restore c:/files to d:/files, you can use:

Strip Prefix = c:

Type
Required: True JOB_TYPE

The Type directive specifies the Job type, which is one of the following:

Backup

Run a backup Job. Normally you will have at least one Backup job for each client you want to save. Normally, unless you turn off cataloging, most all the important statistics and data concerning files backed up will be placed in the catalog.
Restore

Run a restore Job. Normally, you will specify only one Restore job which acts as a sort of prototype that you will modify using the console program in order to perform restores. Although certain basic information from a Restore job is saved in the catalog, it is very minimal compared to the information stored for a Backup job – for example, no File database entries are generated since no Files are saved.

Restore jobs cannot be automatically started by the scheduler as is the case for Backup, Verify and Admin jobs. To restore files, you must use the restore command in the console.

Verify

Run a verify Job. In general, verify jobs permit you to compare the contents of the catalog to the file system, or to what was backed up. In addition, to verifying that a tape that was written can be read, you can also use verify as a sort of tripwire intrusion detection.

Run an admin Job. An Admin job can be used to periodically run catalog pruning, if you do not want to do it at the end of each Backup Job. Although an Admin job is recorded in the catalog, very little data is saved.
Migrate
defines the job that is run as being a Migration Job. A Migration Job is a sort of control job and does not have any Files associated with it, and in that sense they are more or less like an Admin job. Migration jobs simply check to see if there is anything to Migrate then possibly start and control new Backup jobs to migrate the data from the specified Pool to another Pool. Note, any original JobId that is migrated will be marked as having been migrated, and the original JobId can nolonger be used for restores; all restores will be done from the new migrated Job.
Copy
defines the job that is run as being a Copy Job. A Copy Job is a sort of control job and does not have any Files associated with it, and in that sense they are more or less like an Admin job. Copy jobs simply check to see if there is anything to Copy then possibly start and control new Backup jobs to copy the data from the specified Pool to another Pool. Note that when a copy is made, the original JobIds are left unchanged. The new copies can not be used for restoration unless you specifically choose them by JobId. If you subsequently delete a JobId that has a copy, the copy will be automatically upgraded to a Backup rather than a Copy, and it will subsequently be used for restoration.
Consolidate
is used to consolidate Always Incremental Backups jobs, see Always Incremental Backup Scheme. It has been introduced in Bareos Version >= 16.2.4.

Within a particular Job Type, there are also Levels, see Level (Dir->Job).

Verify Job
Type: RES

This directive is an alias.

If you run a verify job without this directive, the last job run will be compared with the catalog, which means that you must immediately follow a backup by a verify command. If you specify a Verify Job Bareos will find the last job with that name that ran. This permits you to run all your backups, then run Verify jobs on those that you wish to be verified (most often a VolumeToCatalog) so that the tape just written is re-read.

Virtual Full Backup Pool
Type: RES
Where
Type: DIRECTORY

This directive applies only to a Restore job and specifies a prefix to the directory name of all files being restored. This permits files to be restored in a different location from which they were saved. If Where is not specified or is set to backslash (/), the files will be restored to their original location. By default, we have set Where in the example configuration files to be /tmp/bareos-restores. This is to prevent accidental overwriting of your files.

Warning

To use Where on NDMP backups, please read Restore files to different path

Write Bootstrap
Type: DIRECTORY_OR_COMMAND

The writebootstrap directive specifies a file name where Bareos will write a bootstrap file for each Backup job run. This directive applies only to Backup Jobs. If the Backup job is a Full save, Bareos will erase any current contents of the specified file before writing the bootstrap records. If the Job is an Incremental or Differential save, Bareos will append the current bootstrap record to the end of the file.

Using this feature, permits you to constantly have a bootstrap file that can recover the current state of your system. Normally, the file specified should be a mounted drive on another machine, so that if your hard disk is lost, you will immediately have a bootstrap record available. Alternatively, you should copy the bootstrap file to another machine after it is updated. Note, it is a good idea to write a separate bootstrap file for each Job backed up including the job that backs up your catalog database.

If the bootstrap-file-specification begins with a vertical bar (|), Bareos will use the specification as the name of a program to which it will pipe the bootstrap record. It could for example be a shell script that emails you the bootstrap record.

Before opening the file or executing the specified command, Bareos performs character substitution like in RunScript directive. To automatically manage your bootstrap files, you can use this in your JobDefs resources:

Job Defs {
...
Write Bootstrap = "%c_%n.bsr"
...
}


For more details on using this file, please see chapter The Bootstrap File.

Write Verify List
Type: DIRECTORY

The following is an example of a valid Job resource definition:

Job Resource Example
Job {
Name = "Minou"
Type = Backup
Level = Incremental                 # default
Client = Minou
FileSet="Minou Full Set"
Storage = DLTDrive
Pool = Default
Schedule = "MinouWeeklyCycle"
Messages = Standard
}


## JobDefs Resource¶

The JobDefs resource permits all the same directives that can appear in a Job resource. However, a JobDefs resource does not create a Job, rather it can be referenced within a Job to provide defaults for that Job. This permits you to concisely define several nearly identical Jobs, each one referencing a JobDefs resource which contains the defaults. Only the changes from the defaults need to be mentioned in each Job.

## Schedule Resource¶

The Schedule resource provides a means of automatically scheduling a Job as well as the ability to override the default Level, Pool, Storage and Messages resources. If a Schedule resource is not referenced in a Job, the Job can only be run manually. In general, you specify an action to be taken and when.

configuration directive name type of data default value remark
Description (Dir->Schedule) = STRING
Enabled (Dir->Schedule) = BOOLEAN yes
Name (Dir->Schedule) = NAME   required
Run (Dir->Schedule) = SCHEDULE_RUN_COMMAND
Description
Type: STRING
Enabled
Type: BOOLEAN yes

En- or disable this resource.

Name
Required: True NAME

The name of the resource.

The name of the schedule being defined.

Run
Type: SCHEDULE_RUN_COMMAND

The Run directive defines when a Job is to be run, and what overrides if any to apply. You may specify multiple run directives within a Schedule resource. If you do, they will all be applied (i.e. multiple schedules). If you have two Run directives that start at the same time, two Jobs will start at the same time (well, within one second of each other).

The Job-overrides permit overriding the Level, the Storage, the Messages, and the Pool specifications provided in the Job resource. In addition, the FullPool, the IncrementalPool, and the DifferentialPool specifications permit overriding the Pool specification according to what backup Job Level is in effect.

By the use of overrides, you may customize a particular Job. For example, you may specify a Messages override for your Incremental backups that outputs messages to a log file, but for your weekly or monthly Full backups, you may send the output by email by using a different Messages override.

Job-overrides are specified as: keyword=value where the keyword is Level, Storage, Messages, Pool, FullPool, DifferentialPool, or IncrementalPool, and the value is as defined on the respective directive formats for the Job resource. You may specify multiple Job-overrides on one Run directive by separating them with one or more spaces or by separating them with a trailing comma. For example:

Level=Full
is all files in the FileSet whether or not they have changed.
Level=Incremental
is all files that have changed since the last backup.
Pool=Weekly
specifies to use the Pool named Weekly.
Storage=DLT_Drive
specifies to use DLT_Drive for the storage device.
Messages=Verbose
specifies to use the Verbose message resource for the Job.
FullPool=Full
specifies to use the Pool named Full if the job is a full backup, or is upgraded from another type to a full backup.
DifferentialPool=Differential
specifies to use the Pool named Differential if the job is a differential backup.
IncrementalPool=Incremental
specifies to use the Pool named Incremental if the job is an incremental backup.
Accurate=yes|no
tells Bareos to use or not the Accurate code for the specific job. It can allow you to save memory and and CPU resources on the catalog server in some cases.
SpoolData=yes|no
tells Bareos to use or not to use spooling for the specific job.

Date-time-specification determines when the Job is to be run. The specification is a repetition, and as a default Bareos is set to run a job at the beginning of the hour of every hour of every day of every week of every month of every year. This is not normally what you want, so you must specify or limit when you want the job to run. Any specification given is assumed to be repetitive in nature and will serve to override or limit the default repetition. This is done by specifying masks or times for the hour, day of the month, day of the week, week of the month, week of the year, and month when you want the job to run. By specifying one or more of the above, you can define a schedule to repeat at almost any frequency you want.

Basically, you must supply a month, day, hour, and minute the Job is to be run. Of these four items to be specified, day is special in that you may either specify a day of the month such as 1, 2, … 31, or you may specify a day of the week such as Monday, Tuesday, … Sunday. Finally, you may also specify a week qualifier to restrict the schedule to the first, second, third, fourth, or fifth week of the month.

For example, if you specify only a day of the week, such as Tuesday the Job will be run every hour of every Tuesday of every Month. That is the month and hour remain set to the defaults of every month and all hours.

Note, by default with no other specification, your job will run at the beginning of every hour. If you wish your job to run more than once in any given hour, you will need to specify multiple run specifications each with a different minute.

The date/time to run the Job can be specified in the following way in pseudo-BNF:

schedule run
<week-keyword>         ::= 1st | 2nd | 3rd | 4th | 5th | first | second | third | fourth | fifth | last
<wday-keyword>         ::= sun | mon | tue | wed | thu | fri | sat | sunday | monday | tuesday | wednesday | thursday | friday | saturday
<week-of-year-keyword> ::= w00 | w01 | ... w52 | w53
<month-keyword>        ::= jan | feb | mar | apr | may | jun | jul | aug | sep | oct | nov | dec | january | february | ... | december
<digit>                ::= 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0
<number>               ::= <digit> | <digit><number>
<12hour>               ::= 0 | 1 | 2 | ... 12
<hour>                 ::= 0 | 1 | 2 | ... 23
<minute>               ::= 0 | 1 | 2 | ... 59
<day>                  ::= 1 | 2 | ... 31
<time>                 ::= <hour>:<minute> | <12hour>:<minute>am | <12hour>:<minute>pm
<time-spec>            ::= at <time> | hourly
<day-range>            ::= <day>-<day>
<month-range>          ::= <month-keyword>-<month-keyword>
<wday-range>           ::= <wday-keyword>-<wday-keyword>
<range>                ::= <day-range> | <month-range> | <wday-range>
<modulo>               ::= <day>/<day> | <week-of-year-keyword>/<week-of-year-keyword>
<date>                 ::= <date-keyword> | <day> | <range>
<date-spec>            ::= <date> | <date-spec>
<day-spec>             ::= <day> | <wday-keyword> | <day> | <wday-range> | <week-keyword> <wday-keyword> | <week-keyword> <wday-range> | daily
<month-spec>           ::= <month-keyword> | <month-range> | monthly
<date-time-spec>       ::= <month-spec> <day-spec> <time-spec>


Note, the Week of Year specification wnn follows the ISO standard definition of the week of the year, where Week 1 is the week in which the first Thursday of the year occurs, or alternatively, the week which contains the 4th of January. Weeks are numbered w01 to w53. w00 for Bareos is the week that precedes the first ISO week (i.e. has the first few days of the year if any occur before Thursday). w00 is not defined by the ISO specification. A week starts with Monday and ends with Sunday.

According to the NIST (US National Institute of Standards and Technology), 12am and 12pm are ambiguous and can be defined to anything. However, 12:01am is the same as 00:01 and 12:01pm is the same as 12:01, so Bareos defines 12am as 00:00 (midnight) and 12pm as 12:00 (noon). You can avoid this abiguity (confusion) by using 24 hour time specifications (i.e. no am/pm).

An example schedule resource that is named WeeklyCycle and runs a job with level full each Sunday at 2:05am and an incremental job Monday through Saturday at 2:05am is:

Schedule Example
Schedule {
Name = "WeeklyCycle"
Run = Level=Full sun at 2:05
Run = Level=Incremental mon-sat at 2:05
}


An example of a possible monthly cycle is as follows:

Schedule {
Name = "MonthlyCycle"
Run = Level=Full Pool=Monthly 1st sun at 2:05
Run = Level=Differential 2nd-5th sun at 2:05
Run = Level=Incremental Pool=Daily mon-sat at 2:05
}


The first of every month:

Schedule {
Name = "First"
Run = Level=Full on 1 at 2:05
Run = Level=Incremental on 2-31 at 2:05
}


The last friday of the month (i.e. the last friday in the last week of the month)

Schedule {
Name = "Last Friday"
Run = Level=Full last fri at 21:00
}


Every 10 minutes:

Schedule {
Name = "TenMinutes"
Run = Level=Full hourly at 0:05
Run = Level=Full hourly at 0:15
Run = Level=Full hourly at 0:25
Run = Level=Full hourly at 0:35
Run = Level=Full hourly at 0:45
Run = Level=Full hourly at 0:55
}


The modulo scheduler makes it easy to specify schedules like odd or even days/weeks, or more generally every n days or weeks. It is called modulo scheduler because it uses the modulo to determine if the schedule must be run or not. The second variable behind the slash lets you determine in which cycle of days/weeks a job should be run. The first part determines on which day/week the job should be run first. E.g. if you want to run a backup in a 5-week-cycle, starting on week 3, you set it up as w03/w05.

Schedule Examples: modulo
Schedule {
Name = "Odd Days"
Run = 1/2 at 23:10
}

Schedule {
Name = "Even Days"
Run = 2/2 at 23:10
}

Schedule {
Name = "On the 3rd week in a 5-week-cycle"
Run = w03/w05 at 23:10
}

Schedule {
Name = "Odd Weeks"
Run = w01/w02 at 23:10
}

Schedule {
Name = "Even Weeks"
Run = w02/w02 at 23:10
}


### Technical Notes on Schedules¶

For any schedule you have defined, you can see how these bits are set by doing a show schedules command in the Console program. Please note that the bit mask is zero based, and Sunday is the first day of the week (bit zero).

## FileSet Resource¶

The FileSet resource defines what files are to be included or excluded in a backup job. A FileSet resource is required for each backup Job. It consists of a list of files or directories to be included, a list of files or directories to be excluded and the various backup options such as compression, encryption, and signatures that are to be applied to each file.

Any change to the list of the included files will cause Bareos to automatically create a new FileSet (defined by the name and an MD5 checksum of the Include/Exclude File directives contents). Each time a new FileSet is created Bareos will ensure that the next backup is always a full backup. However, this does only apply to changes in directives File (Dir->Fileset->Include) and File (Dir->Fileset->Exclude). Changes in other directives or the FileSet Options Resource do not result in upgrade to a full backup. Use Ignore File Set Changes (Dir->Fileset) to disable this behavior.

configuration directive name type of data default value remark
Description (Dir->Fileset) = STRING
Enable VSS (Dir->Fileset) = BOOLEAN yes
Exclude (Dir->Fileset) { INCLUDE_EXCLUDE_ITEM }
Ignore File Set Changes (Dir->Fileset) = BOOLEAN no
Include (Dir->Fileset) { INCLUDE_EXCLUDE_ITEM }
Name (Dir->Fileset) = NAME   required
Description
Type: STRING

Information only.

Enable VSS
Type: BOOLEAN yes
Exclude
Type: INCLUDE_EXCLUDE_ITEM

Describe the files, that should get excluded from a backup, see section about the FileSet Exclude Resource.

Ignore File Set Changes
Type: BOOLEAN no

Normally, if you modify File (Dir->Fileset->Include) or File (Dir->Fileset->Exclude) of the FileSet Include or Exclude lists, the next backup will be forced to a full so that Bareos can guarantee that any additions or deletions are properly saved.

We strongly recommend against setting this directive to yes, since doing so may cause you to have an incomplete set of backups.

If this directive is set to yes, any changes you make to the FileSet Include or Exclude lists, will not force a Full during subsequent backups.

Include
Type: INCLUDE_EXCLUDE_ITEM

Describe the files, that should get included to a backup, see section about the FileSet Include Resource.

Name
Required: True NAME

The name of the resource.

The name of the FileSet resource.

### FileSet Include Resource¶

The Include resource must contain a list of directories and/or files to be processed in the backup job.

Normally, all files found in all subdirectories of any directory in the Include File list will be backed up. The Include resource may also contain one or more Options resources that specify options such as compression to be applied to all or any subset of the files found when processing the file-list for backup. Please see below for more details concerning Options resources.

There can be any number of Include resources within the FileSet, each having its own list of directories or files to be backed up and the backup options defined by one or more Options resources.

Please take note of the following items in the FileSet syntax:

1. There is no equal sign (=) after the Include and before the opening brace ({). The same is true for the Exclude.
2. Each directory (or filename) to be included or excluded is preceded by a File =. Previously they were simply listed on separate lines.
3. The Exclude resource does not accept Options.
4. When using wild-cards or regular expressions, directory names are always terminated with a slash (/) and filenames have no trailing slash.
File
Type: “path” “

The file list consists of one file or directory name per line. Directory names should be specified without a trailing slash with Unix path notation.

Note

Windows users, please take note to specify directories (even c:/...) in Unix path notation. If you use Windows conventions, you will most likely not be able to restore your files due to the fact that the Windows path separator was defined as an escape character long before Windows existed, and Bareos adheres to that convention (i.e. means the next character appears as itself).

You should always specify a full path for every directory and file that you list in the FileSet. In addition, on Windows machines, you should always prefix the directory or filename with the drive specification (e.g. c:/xxx) using Unix directory name separators (forward slash). The drive letter itself can be upper or lower case (e.g. c:/xxx or C:/xxx).

A file item may not contain wild-cards. Use directives in the FileSet Options Resource if you wish to specify wild-cards or regular expression matching.

Bareos’s default for processing directories is to recursively descend in the directory saving all files and subdirectories. Bareos will not by default cross filesystems (or mount points in Unix parlance). This means that if you specify the root partition (e.g. /), Bareos will save only the root partition and not any of the other mounted filesystems. Similarly on Windows systems, you must explicitly specify each of the drives you want saved (e.g. c:/ and d:/ …). In addition, at least for Windows systems, you will most likely want to enclose each specification within double quotes particularly if the directory (or file) name contains spaces.

Take special care not to include a directory twice or Bareos will by default backup the same files two times wasting a lot of space on your archive device. Including a directory twice is very easy to do. For example:

File Set
Include {
Options {
compression=GZIP
}
File = /
File = /usr
}


on a Unix system where /usr is a subdirectory (rather than a mounted filesystem) will cause /usr to be backed up twice. Using the directive Shadowing (Dir->Fileset->Include->Options) Bareos can be configured to detect and exclude duplicates automatically.

To include names containing spaces, enclose the name between double-quotes.

There are a number of special cases when specifying directories and files. They are:

@filename

Any name preceded by an at-sign (@) is assumed to be the name of a file, which contains a list of files each preceded by a “File =”. The named file is read once when the configuration file is parsed during the Director startup. Note, that the file is read on the Director’s machine and not on the Client’s. In fact, the @filename can appear anywhere within a configuration file where a token would be read, and the contents of the named file will be logically inserted in the place of the @filename. What must be in the file depends on the location the @filename is specified in the conf file. For example:

File Set with Include File
Include {
Options {
compression=GZIP
}
@/home/files/my-files
}

File = "<includefile-server"

Any file item preceded by a less-than sign (<) will be taken to be a file. This file will be read on the Director’s machine (see below for doing it on the Client machine) at the time the Job starts, and the data will be assumed to be a list of directories or files, one per line, to be included. The names should start in column 1 and should not be quoted even if they contain spaces. This feature allows you to modify the external file and change what will be saved without stopping and restarting Bareos as would be necessary if using the @ modifier noted above. For example:

Include {
Options {
signature = SHA1
}
File = "</home/files/local-filelist"
}

File = "\\<includefile-client"

If you precede the less-than sign (<) with two backslashes as in \\<, the file-list will be read on the Client machine instead of on the Director’s machine.

Include {
Options {
Signature = SHA1
}
File = "\\</home/xxx/filelist-on-client"
}

File = "|command-server"

Any name beginning with a vertical bar (|) is assumed to be the name of a program. This program will be executed on the Director’s machine at the time the Job starts (not when the Director reads the configuration file), and any output from that program will be assumed to be a list of files or directories, one per line, to be included. Before submitting the specified command Bareos will performe character substitution.

This allows you to have a job that, for example, includes all the local partitions even if you change the partitioning by adding a disk. The examples below show you how to do this. However, please note two things:

1. if you want the local filesystems, you probably should be using the FS Type (Dir->Fileset->Include->Options) directive and set One FS (Dir->Fileset->Include->Options) = no.
2. the exact syntax of the command needed in the examples below is very system dependent. For example, on recent Linux systems, you may need to add the -P option, on FreeBSD systems, the options will be different as well.

In general, you will need to prefix your command or commands with a sh -c so that they are invoked by a shell. This will not be the case if you are invoking a script as in the second example below. Also, you must take care to escape (precede with a \) wild-cards, shell character, and to ensure that any spaces in your command are escaped as well. If you use a single quotes (’) within a double quote (“), Bareos will treat everything between the single quotes as one field so it will not be necessary to escape the spaces. In general, getting all the quotes and escapes correct is a real pain as you can see by the next example. As a consequence, it is often easier to put everything in a file and simply use the file name within Bareos. In that case the sh -c will not be necessary providing the first line of the file is #!/bin/sh.

As an example:

File Set with inline script
Include {
Options {
signature = SHA1
}
File = "|sh -c 'df -l | grep \"^/dev/hd[ab]\" | grep -v \".*/tmp\" | awk \"{print \\$6}\"'" }  will produce a list of all the local partitions on a Linux system. Quoting is a real problem because you must quote for Bareos which consists of preceding every \ and every ” with a \, and you must also quote for the shell command. In the end, it is probably easier just to execute a script file with: File Set with external script Include { Options { signature=MD5 } File = "|my_partitions" }  where my_partitions has: #!/bin/sh df -l | grep "^/dev/hd[ab]" | grep -v ".*/tmp" \ | awk "{print \$6}"

File = "\\|command-client"

If the vertical bar (|) in front of my_partitions is preceded by a two backslashes as in \\|, the program will be executed on the Client’s machine instead of on the Director’s machine. An example, provided by John Donagher, that backs up all the local UFS partitions on a remote system is:

File Set with inline script in quotes
FileSet {
Name = "All local partitions"
Include {
Options {
Signature=SHA1
OneFs=yes
}
File = "\\|bash -c \"df -klF ufs | tail +2 | awk '{print \$6}'\"" } }  The above requires two backslash characters after the double quote (one preserves the next one). If you are a Linux user, just change the ufs to ext3 (or your preferred filesystem type), and you will be in business. If you know what filesystems you have mounted on your system, e.g. for Linux only using ext2, ext3 or ext4, you can backup all local filesystems using something like: File Set to backup all extfs partions Include { Options { Signature = SHA1 OneFs=no FsType=ext2 } File = / }  Raw Partition If you explicitly specify a block device such as /dev/hda1, then Bareos will assume that this is a raw partition to be backed up. In this case, you are strongly urged to specify a Sparse=yes include option, otherwise, you will save the whole partition rather than just the actual data that the partition contains. For example: Backup Raw Partitions Include { Options { Signature=MD5 Sparse=yes } File = /dev/hd6 }  will backup the data in device /dev/hd6. Note, /dev/hd6 must be the raw partition itself. Bareos will not back it up as a raw device if you specify a symbolic link to a raw device such as my be created by the LVM Snapshot utilities. Exclude Dir Containing Type: filename This directive can be added to the Include section of the FileSet resource. If the specified filename (filename-string) is found on the Client in any directory to be backed up, the whole directory will be ignored (not backed up). We recommend to use the filename .nobackup, as it is a hidden file on unix systems, and explains what is the purpose of the file. For example: Exlude Directories containing the file .nobackup # List of files to be backed up FileSet { Name = "MyFileSet" Include { Options { Signature = MD5 } File = /home Exclude Dir Containing = .nobackup } }  But in /home, there may be hundreds of directories of users and some people want to indicate that they don’t want to have certain directories backed up. For example, with the above FileSet, if the user or sysadmin creates a file named .nobackup in specific directories, such as /home/user/www/cache/.nobackup /home/user/temp/.nobackup  then Bareos will not backup the two directories named: /home/user/www/cache /home/user/temp  Subdirectories will not be backed up. That is, the directive applies to the two directories in question and any children (be they files, directories, etc). Plugin Type: “plugin-name” “:plugin-parameter1” “:plugin-parameter2” “:…” Instead of only specifying files, a file set can also use plugins. Plugins are additional libraries that handle specific requirements. The purpose of plugins is to provide an interface to any system program for backup and restore. That allows you, for example, to do database backups without a local dump. The syntax and semantics of the Plugin directive require the first part of the string up to the colon to be the name of the plugin. Everything after the first colon is ignored by the File daemon but is passed to the plugin. Thus the plugin writer may define the meaning of the rest of the string as he wishes. Since Version >= 20 the plugin string can be spread over multiple lines using quotes as shown above. For more information, see File Daemon Plugins. It is also possible to define more than one plugin directive in a FileSet to do several database dumps at once. Options See the FileSet Options Resource section. ### FileSet Exclude Resource¶ FileSet Exclude-Resources very similar to Include-Resources, except that they only allow following directives: File Type: “path” “ Files to exclude are descripted in the same way as at the FileSet Include Resource. For example: FileSet using Exclude FileSet { Name = Exclusion_example Include { Options { Signature = SHA1 } File = / File = /boot File = /home File = /rescue File = /usr } Exclude { File = /proc File = /tmp # Don't add trailing / File = .journal File = .autofsck } }  Another way to exclude files and directories is to use the Exclude (Dir->Fileset->Include->Options) = yes setting in a Include section. ### FileSet Options Resource¶ The Options resource is optional, but when specified, it will contain a list of keyword=value options to be applied to the file-list. See below for the definition of file-list. Multiple Options resources may be specified one after another. As the files are found in the specified directories, the Options will applied to the filenames to determine if and how the file should be backed up. The wildcard and regular expression pattern matching parts of the Options resources are checked in the order they are specified in the FileSet until the first one that matches. Once one matches, the compression and other flags within the Options specification will apply to the pattern matched. A key point is that in the absence of an Option or no other Option is matched, every file is accepted for backing up. This means that if you want to exclude something, you must explicitly specify an Option with an exclude = yes and some pattern matching. Once Bareos determines that the Options resource matches the file under consideration, that file will be saved without looking at any other Options resources that may be present. This means that any wild cards must appear before an Options resource without wild cards. If for some reason, Bareos checks all the Options resources to a file under consideration for backup, but there are no matches (generally because of wild cards that don’t match), Bareos as a default will then backup the file. This is quite logical if you consider the case of no Options clause is specified, where you want everything to be backed up, and it is important to keep in mind when excluding as mentioned above. However, one additional point is that in the case that no match was found, Bareos will use the options found in the last Options resource. As a consequence, if you want a particular set of “default” options, you should put them in an Options resource after any other Options. It is a good idea to put all your wild-card and regex expressions inside double quotes to prevent conf file scanning problems. This is perhaps a bit overwhelming, so there are a number of examples included below to illustrate how this works. You find yourself using a lot of Regex statements, which will cost quite a lot of CPU time, we recommend you simplify them if you can, or better yet convert them to Wild statements which are much more efficient. The directives within an Options resource may be one of the following: Auto Exclude Type: BOOLEAN yes Automatically exclude files not intended for backup. Currently only used for Windows, to exclude files defined in the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup, see section FilesNotToBackup Registry Key. Since Version >= 14.2.2. Compression Type: Configures the software compression to be used by the File Daemon. The compression is done on a file by file basis. Software compression gets important if you are writing to a device that does not support compression by itself (e.g. hard disks). Otherwise, all modern tape drive do support hardware compression. Software compression can also be helpful to reduce the required network bandwidth, as compression is done on the File Daemon. However, using Bareos software compression and device hardware compression together is not advised, as trying to compress precompressed data is a very CPU-intense task and probably end up in even larger data. You can overwrite this option per Storage resource using the Allow Compression (Dir->Storage) = no option. GZIP All files saved will be software compressed using the GNU ZIP compression format. Specifying GZIP uses the default compression level 6 (i.e. :strong: GZIP is identical to GZIP6). If you want a different compression level (1 through 9), you can specify it by appending the level number with no intervening spaces to GZIP. Thus compression=GZIP1 would give minimum compression but the fastest algorithm, and :strong: compression=GZIP9 would give the highest level of compression, but requires more computation. According to the GZIP documentation, compression levels greater than six generally give very little extra compression and are rather CPU intensive. LZO All files saved will be software compressed using the LZO compression format. The compression is done on a file by file basis by the File daemon. Everything else about GZIP is true for LZO. LZO provides much faster compression and decompression speed but lower compression ratio than GZIP. If your CPU is fast enough you should be able to compress your data without making the backup duration longer. Note that Bareos only use one compression level LZO1X-1 specified by LZO. LZFAST Deprecated since version 19.2. All files saved will be software compressed using the LZFAST compression format. The compression is done on a file by file basis by the File daemon. Everything else about GZIP is true for LZFAST. LZFAST provides much faster compression and decompression speed but lower compression ratio than GZIP. If your CPU is fast enough you should be able to compress your data without making the backup duration longer. Warning This is a nonstandard compression algorithm and support for compressing backups using it may be removed in a future version. Please consider using one of the other algorithms instead. LZ4 All files saved will be software compressed using the LZ4 compression format. The compression is done on a file by file basis by the File daemon. Everything else about GZIP is true for LZ4. LZ4 provides much faster compression and decompression speed but lower compression ratio than GZIP. If your CPU is fast enough you should be able to compress your data without making the backup duration longer. Both LZ4 and LZ4HC have the same decompression speed which is about twice the speed of the LZO compression. So for a restore both LZ4 and LZ4HC are good candidates. LZ4HC All files saved will be software compressed using the LZ4HC compression format. The compression is done on a file by file basis by the File daemon. Everything else about GZIP is true for LZ4. LZ4HC is the High Compression version of the LZ4 compression. It has a higher compression ratio than LZ4 and is more comparable to GZIP-6 in both compression rate and cpu usage. Both LZ4 and LZ4HC have the same decompression speed which is about twice the speed of the LZO compression. So for a restore both LZ4 and LZ4HC are good candidates. Signature Type: It is strongly recommend to use signatures for your backups. Note, only one type of signature can be computed per file. MD5 An MD5 signature will be computed for each files saved. Adding this option generates about 5% extra overhead for each file saved. In addition to the additional CPU time, the MD5 signature adds 16 more bytes per file to your catalog. SHA1 An SHA1 signature will be computed for each files saved. The SHA1 algorithm is purported to be some what slower than the MD5 algorithm, but at the same time is significantly better from a cryptographic point of view (i.e. much fewer collisions). The SHA1 signature requires adds 20 bytes per file to your catalog. SHA256 SHA512 Base Job Type: The options letters specified are used when running a Backup Level=Full with BaseJobs. The options letters are the same than in the verify= option below. Accurate Type: The options letters specified are used when running a Backup Level=Incremental/Differential in Accurate mode. The options letters are the same than in the verify= option below. The default setting is mcs which means that modification time, change time and size are compared. Verify Type: The options letters specified are used when running a Verify Level=Catalog as well as the DiskToCatalog level job. The options letters may be any combination of the following: i compare the inodes p compare the permission bits n compare the number of links u compare the user id g compare the group id s compare the size a compare the access time m compare the modification time (st_mtime) c compare the change time (st_ctime) d report file size decreases 5 compare the MD5 signature 1 compare the SHA1 signature A Only for Accurate option, it allows to always backup the file A useful set of general options on the Level=Catalog or Level=DiskToCatalog verify is pins5 i.e. compare permission bits, inodes, number of links, size, and MD5 changes. One FS Type: yes|no yes If set to yes, Bareos will remain on a single file system. That is it will not backup file systems that are mounted on a subdirectory. If you are using a Unix system, you may not even be aware that there are several different filesystems as they are often automatically mounted by the OS (e.g. /dev, /net, /sys, /proc, …). Bareos will inform you when it decides not to traverse into another filesystem. This can be very useful if you forgot to backup a particular partition. An example of the informational message in the job report is: host-fd: /misc is a different filesystem. Will not descend from / into /misc host-fd: /net is a different filesystem. Will not descend from / into /net host-fd: /var/lib/nfs/rpc_pipefs is a different filesystem. Will not descend from /var/lib/nfs into /var/lib/nfs/rpc_pipefs host-fd: /selinux is a different filesystem. Will not descend from / into /selinux host-fd: /sys is a different filesystem. Will not descend from / into /sys host-fd: /dev is a different filesystem. Will not descend from / into /dev host-fd: /home is a different filesystem. Will not descend from / into /home  If you wish to backup multiple filesystems, you can explicitly list each filesystem you want saved. Otherwise, if you set the onefs option to no, Bareos will backup all mounted file systems (i.e. traverse mount points) that are found within the FileSet. Thus if you have NFS or Samba file systems mounted on a directory listed in your FileSet, they will also be backed up. Normally, it is preferable to set One FS (Dir->Fileset->Include->Options) = yes and to explicitly name each filesystem you want backed up. Explicitly naming the filesystems you want backed up avoids the possibility of getting into a infinite loop recursing filesystems. Another possibility is to use One FS (Dir->Fileset->Include->Options) = no and to set FS Type (Dir->Fileset->Include->Options) = ext2, .... See the example below for more details. If you think that Bareos should be backing up a particular directory and it is not, and you have onefs=yes set, before you complain, please do: stat / stat <filesystem>  where you replace filesystem with the one in question. If the Device: number is different for / and for your filesystem, then they are on different filesystems. E.g. root@host:~# stat / File: /' Size: 4096 Blocks: 16 IO Block: 4096 directory Device: 302h/770d Inode: 2 Links: 26 Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2005-11-10 12:28:01.000000000 +0100 Modify: 2005-09-27 17:52:32.000000000 +0200 Change: 2005-09-27 17:52:32.000000000 +0200 root@host:~# stat /net File: /home' Size: 4096 Blocks: 16 IO Block: 4096 directory Device: 308h/776d Inode: 2 Links: 7 Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2005-11-10 12:28:02.000000000 +0100 Modify: 2005-11-06 12:36:48.000000000 +0100 Change: 2005-11-06 12:36:48.000000000 +0100  Also be aware that even if you include /home in your list of files to backup, as you most likely should, you will get the informational message that “/home is a different filesystem” when Bareos is processing the / directory. This message does not indicate an error. This message means that while examining the File = referred to in the second part of the message, Bareos will not descend into the directory mentioned in the first part of the message. However, it is possible that the separate filesystem will be backed up despite the message. For example, consider the following FileSet: File = / File = /var  where /var is a separate filesystem. In this example, you will get a message saying that Bareos will not decend from / into /var. But it is important to realise that Bareos will descend into /var from the second File directive shown above. In effect, the warning is bogus, but it is supplied to alert you to possible omissions from your FileSet. In this example, /var will be backed up. If you changed the FileSet such that it did not specify /var, then /var will not be backed up. Honor No Dump Flag Type: yes|no If your file system supports the nodump flag (e. g. most BSD-derived systems) Bareos will honor the setting of the flag when this option is set to yes. Files having this flag set will not be included in the backup and will not show up in the catalog. For directories with the nodump flag set recursion is turned off and the directory will be listed in the catalog. If the honor nodump flag option is not defined or set to no every file and directory will be eligible for backup. Portable Type: yes|no If set to yes (default is no), the Bareos File daemon will backup Win32 files in a portable format, but not all Win32 file attributes will be saved and restored. By default, this option is set to no, which means that on Win32 systems, the data will be backed up using Windows API calls and on WinNT/2K/XP, all the security and ownership attributes will be properly backed up (and restored). However this format is not portable to other systems – e.g. Unix, Win95/98/Me. When backing up Unix systems, this option is ignored, and unless you have a specific need to have portable backups, we recommend accept the default (no) so that the maximum information concerning your files is saved. Recurse Type: yes|no If set to yes (the default), Bareos will recurse (or descend) into all subdirectories found unless the directory is explicitly excluded using an exclude definition. If you set recurse=no, Bareos will save the subdirectory entries, but not descend into the subdirectories, and thus will not save the files or directories contained in the subdirectories. Normally, you will want the default (yes). Sparse Type: yes|no Enable special code that checks for sparse files such as created by ndbm. The default is no, so no checks are made for sparse files. You may specify sparse=yes even on files that are not sparse file. No harm will be done, but there will be a small additional overhead to check for buffers of all zero, and if there is a 32K block of all zeros (see below), that block will become a hole in the file, which may not be desirable if the original file was not a sparse file. Restrictions: Bareos reads files in 32K buffers. If the whole buffer is zero, it will be treated as a sparse block and not written to tape. However, if any part of the buffer is non-zero, the whole buffer will be written to tape, possibly including some disk sectors (generally 4098 bytes) that are all zero. As a consequence, Bareos’s detection of sparse blocks is in 32K increments rather than the system block size. If anyone considers this to be a real problem, please send in a request for change with the reason. If you are not familiar with sparse files, an example is say a file where you wrote 512 bytes at address zero, then 512 bytes at address 1 million. The operating system will allocate only two blocks, and the empty space or hole will have nothing allocated. However, when you read the sparse file and read the addresses where nothing was written, the OS will return all zeros as if the space were allocated, and if you backup such a file, a lot of space will be used to write zeros to the volume. Worse yet, when you restore the file, all the previously empty space will now be allocated using much more disk space. By turning on the sparse option, Bareos will specifically look for empty space in the file, and any empty space will not be written to the Volume, nor will it be restored. The price to pay for this is that Bareos must search each block it reads before writing it. On a slow system, this may be important. If you suspect you have sparse files, you should benchmark the difference or set sparse for only those files that are really sparse. You probably should not use this option on files or raw disk devices that are not really sparse files (i.e. have holes in them). Read Fifo Type: yes|no If enabled, tells the Client to read the data on a backup and write the data on a restore to any FIFO (pipe) that is explicitly mentioned in the FileSet. In this case, you must have a program already running that writes into the FIFO for a backup or reads from the FIFO on a restore. This can be accomplished with the RunBeforeJob directive. If this is not the case, Bareos will hang indefinitely on reading/writing the FIFO. When this is not enabled (default), the Client simply saves the directory entry for the FIFO. Normally, when Bareos runs a RunBeforeJob, it waits until that script terminates, and if the script accesses the FIFO to write into it, the Bareos job will block and everything will stall. However, Vladimir Stavrinov as supplied tip that allows this feature to work correctly. He simply adds the following to the beginning of the RunBeforeJob script: exec > /dev/null  FileSet with Fifo Include { Options { signature=SHA1 readfifo=yes } File = "/home/abc/fifo" }  This feature can be used to do a “hot” database backup. You can use the RunBeforeJob to create the fifo and to start a program that dynamically reads your database and writes it to the fifo. Bareos will then write it to the Volume. During the restore operation, the inverse is true, after Bareos creates the fifo if there was any data stored with it (no need to explicitly list it or add any options), that data will be written back to the fifo. As a consequence, if any such FIFOs exist in the fileset to be restored, you must ensure that there is a reader program or Bareos will block, and after one minute, Bareos will time out the write to the fifo and move on to the next file. If you are planing to use a Fifo for backup, better take a look to the bpipe Plugin section. No Atime Type: yes|no If enabled, and if your Operating System supports the O_NOATIME file open flag, Bareos will open all files to be backed up with this option. It makes it possible to read a file without updating the inode atime (and also without the inode ctime update which happens if you try to set the atime back to its previous value). It also prevents a race condition when two programs are reading the same file, but only one does not want to change the atime. It’s most useful for backup programs and file integrity checkers (and Bareos can fit on both categories). This option is particularly useful for sites where users are sensitive to their MailBox file access time. It replaces both the keepatime option without the inconveniences of that option (see below). If your Operating System does not support this option, it will be silently ignored by Bareos. Mtime Only Type: yes|no If enabled, tells the Client that the selection of files during Incremental and Differential backups should based only on the st_mtime value in the stat() packet. The default is no which means that the selection of files to be backed up will be based on both the st_mtime and the st_ctime values. In general, it is not recommended to use this option. Keep Atime Type: yes|no The default is no. When enabled, Bareos will reset the st_atime (access time) field of files that it backs up to their value prior to the backup. This option is not generally recommended as there are very few programs that use st_atime, and the backup overhead is increased because of the additional system call necessary to reset the times. However, for some files, such as mailboxes, when Bareos backs up the file, the user will notice that someone (Bareos) has accessed the file. In this, case keepatime can be useful. (I’m not sure this works on Win32). Note, if you use this feature, when Bareos resets the access time, the change time (st_ctime) will automatically be modified by the system, so on the next incremental job, the file will be backed up even if it has not changed. As a consequence, you will probably also want to use mtimeonly = yes as well as keepatime (thanks to Rudolf Cejka for this tip). Check File Changes Type: yes|no If enabled, the Client will check size, age of each file after their backup to see if they have changed during backup. If time or size mismatch, an error will raise. zog-fd: Client1.2007-03-31_09.46.21 Error: /tmp/test mtime changed during backup.  In general, it is recommended to use this option. Type: yes|no yes When enabled (default), this directive will cause hard links to be backed up. However, the File daemon keeps track of hard linked files and will backup the data only once. The process of keeping track of the hard links can be quite expensive if you have lots of them (tens of thousands or more). This doesn’t occur on normal Unix systems, but if you use a program like BackupPC, it can create hundreds of thousands, or even millions of hard links. Backups become very long and the File daemon will consume a lot of CPU power checking hard links. In such a case, set Hard Links (Dir->Fileset->Include->Options) = no and hard links will not be backed up. Note, using this option will most likely backup more data and on a restore the file system will not be restored identically to the original. Wild Type: Specifies a wild-card string to be applied to the filenames and directory names. Note, if Exclude is not enabled, the wild-card will select which files are to be included. If Exclude=yes is specified, the wild-card will select which files are to be excluded. Multiple wild-card directives may be specified, and they will be applied in turn until the first one that matches. Note, if you exclude a directory, no files or directories below it will be matched. You may want to test your expressions prior to running your backup by using the bwild program. You can also test your full FileSet definition by using the estimate command. It is recommended to enclose the string in double quotes. Wild Dir Type: Specifies a wild-card string to be applied to directory names only. No filenames will be matched by this directive. Note, if Exclude is not enabled, the wild-card will select directories to be included. If Exclude=yes is specified, the wild-card will select which directories are to be excluded. Multiple wild-card directives may be specified, and they will be applied in turn until the first one that matches. Note, if you exclude a directory, no files or directories below it will be matched. It is recommended to enclose the string in double quotes. You may want to test your expressions prior to running your backup by using the bwild program. You can also test your full FileSet definition by using the estimate command. Wild File Type: Specifies a wild-card string to be applied to non-directories. That is no directory entries will be matched by this directive. However, note that the match is done against the full path and filename, so your wild-card string must take into account that filenames are preceded by the full path. If Exclude (Dir->Fileset->Include->Options) is not enabled, the wild-card will select which files are to be included. If Exclude (Dir->Fileset->Include->Options) = yes is specified, the wild-card will select which files are to be excluded. Multiple wild-card directives may be specified, and they will be applied in turn until the first one that matches. It is recommended to enclose the string in double quotes. You may want to test your expressions prior to running your backup by using the bwild program. You can also test your full FileSet definition by using the estimate command. An example of excluding with the WildFile option on Win32 machines is presented below. Regex Type: Specifies a POSIX extended regular expression to be applied to the filenames and directory names, which include the full path. If :strong: Exclude is not enabled, the regex will select which files are to be included. If Exclude=yes is specified, the regex will select which files are to be excluded. Multiple regex directives may be specified within an Options resource, and they will be applied in turn until the first one that matches. Note, if you exclude a directory, no files or directories below it will be matched. It is recommended to enclose the string in double quotes. The regex libraries differ from one operating system to another, and in addition, regular expressions are complicated, so you may want to test your expressions prior to running your backup by using the bregex program. You can also test your full FileSet definition by using the estimate command. You find yourself using a lot of Regex statements, which will cost quite a lot of CPU time, we recommend you simplify them if you can, or better yet convert them to Wild statements which are much more efficient. Regex File Type: Specifies a POSIX extended regular expression to be applied to non-directories. No directories will be matched by this directive. However, note that the match is done against the full path and filename, so your regex string must take into account that filenames are preceded by the full path. If Exclude is not enabled, the regex will select which files are to be included. If Exclude=yes is specified, the regex will select which files are to be excluded. Multiple regex directives may be specified, and they will be applied in turn until the first one that matches. It is recommended to enclose the string in double quotes. The regex libraries differ from one operating system to another, and in addition, regular expressions are complicated, so you may want to test your expressions prior to running your backup by using the bregex program. Regex Dir Type: Specifies a POSIX extended regular expression to be applied to directory names only. No filenames will be matched by this directive. Note, if Exclude is not enabled, the regex will select directories files are to be included. If Exclude=yes is specified, the regex will select which files are to be excluded. Multiple regex directives may be specified, and they will be applied in turn until the first one that matches. Note, if you exclude a directory, no files or directories below it will be matched. It is recommended to enclose the string in double quotes. The regex libraries differ from one operating system to another, and in addition, regular expressions are complicated, so you may want to test your expressions prior to running your backup by using the bregex program. Exclude Type: BOOLEAN When enabled, any files matched within the Options will be excluded from the backup. ACL Support Type: yes|no yes Since Version >= 18.2.4 the default is yes. If this option is set to yes, and you have the POSIX libacl installed on your Linux system, Bareos will backup the file and directory Unix Access Control Lists (ACL) as defined in IEEE Std 1003.1e draft 17 and “POSIX.1e” (abandoned). This feature is available on Unix systems only and requires the Linux ACL library. Bareos is automatically compiled with ACL support if the libacl library is installed on your Linux system (shown in config.out). While restoring the files Bareos will try to restore the ACLs, if there is no ACL support available on the system, Bareos restores the files and directories but not the ACL information. Please note, if you backup an EXT3 or XFS filesystem with ACLs, then you restore them to a different filesystem (perhaps reiserfs) that does not have ACLs, the ACLs will be ignored. For other operating systems there is support for either POSIX ACLs or the more extensible NFSv4 ACLs. The ACL stream format between Operation Systems is not compatible so for example an ACL saved on Linux cannot be restored on Solaris. The following Operating Systems are currently supported: • AIX (pre-5.3 (POSIX) and post 5.3 (POSIX and NFSv4) ACLs) • Darwin • FreeBSD (POSIX and NFSv4/ZFS ACLs) • HPUX • IRIX • Linux • Solaris (POSIX and NFSv4/ZFS ACLs) • Tru64 XAttr Support Type: yes|no yes Since Version >= 18.2.4 the default is yes. If this option is set to yes, and your operating system support either so called Extended Attributes or Extensible Attributes Bareos will backup the file and directory XATTR data. This feature is available on UNIX only and depends on support of some specific library calls in libc. The XATTR stream format between Operating Systems is not compatible so an XATTR saved on Linux cannot for example be restored on Solaris. On some operating systems ACLs are also stored as Extended Attributes (Linux, Darwin, FreeBSD) Bareos checks if you have the aclsupport option enabled and if so will not save the same info when saving extended attribute information. Thus ACLs are only saved once. The following Operating Systems are currently supported: • AIX (Extended Attributes) • Darwin (Extended Attributes) • FreeBSD (Extended Attributes) • IRIX (Extended Attributes) • Linux (Extended Attributes) • NetBSD (Extended Attributes) • Solaris (Extended Attributes and Extensible Attributes) • Tru64 (Extended Attributes) Ignore Case Type: yes|no The default is no. On Windows systems, you will almost surely want to set this to yes. When this directive is set to yes all the case of character will be ignored in wild-card and regex comparisons. That is an uppercase A will match a lowercase a. FS Type Type: filesystem-type This option allows you to select files and directories by the filesystem type. Example filesystem-type names are: ext2, jfs, ntfs, proc, reiserfs, xfs, usbdevfs, sysfs, smbfs, iso9660. You may have multiple Fstype directives, and thus permit matching of multiple filesystem types within a single Options resource. If the type specified on the fstype directive does not match the filesystem for a particular directive, that directory will not be backed up. This directive can be used to prevent backing up non-local filesystems. Normally, when you use this directive, you would also set One FS (Dir->Fileset->Include->Options) = no so that Bareos will traverse filesystems. This option is not implemented in Win32 systems. Drive Type Type: Windows-drive-type This option is effective only on Windows machines and is somewhat similar to the Unix/Linux FS Type (Dir->Fileset->Include->Options) described above, except that it allows you to select what Windows drive types you want to allow. By default all drive types are accepted. The permitted drivetype names are: removable, fixed, remote, cdrom, ramdisk You may have multiple Driveype directives, and thus permit matching of multiple drive types within a single Options resource. If the type specified on the drivetype directive does not match the filesystem for a particular directive, that directory will not be backed up. This directive can be used to prevent backing up non-local filesystems. Normally, when you use this directive, you would also set One FS (Dir->Fileset->Include->Options) = no so that Bareos will traverse filesystems. This option is not implemented in Unix/Linux systems. Hfs Plus Support Type: yes|no This option allows you to turn on support for Mac OSX HFS plus finder information. Strip Path Type: This option will cause integer paths to be stripped from the front of the full path/filename being backed up. This can be useful if you are migrating data from another vendor or if you have taken a snapshot into some subdirectory. This directive can cause your filenames to be overlayed with regular backup data, so should be used only by experts and with great care. Size Type: sizeoption This option will allow you to select files by their actual size. You can select either files smaller than a certain size or bigger then a certain size, files of a size in a certain range or files of a size which is within 1 % of its actual size. The following settings can be used: <size>-<size> Select file in range size - size. <size Select files smaller than size. >size Select files bigger than size. size Select files which are within 1 % of size. Shadowing Type: none|localwarn|localremove|globalwarn|globalremove none This option performs a check within the fileset for any file-list entries which are shadowing each other. Lets say you specify / and /usr but /usr is not a separate filesystem. Then in the normal situation both / and /usr would lead to data being backed up twice. The following settings can be used: none Do NO shadowing check localwarn Do shadowing check within one include block and warn localremove Do shadowing check within one include block and remove duplicates globalwarn Do shadowing check between all include blocks and warn globalremove Do shadowing check between all include blocks and remove duplicates The local and global part of the setting relate to the fact if the check should be performed only within one include block (local) or between multiple include blocks of the same fileset (global). The warn and remove part of the keyword sets the action e.g. warn the user about shadowing or remove the entry shadowing the other. Example for a fileset resource with fileset shadow warning enabled: FileSet resource with fileset shadow warning enabled FileSet { Name = "Test Set" Include { Options { signature = MD5 shadowing = localwarn } File = / File = /usr } }  Meta Type: tag This option will add a meta tag to a fileset. These meta tags are used by the Native NDMP protocol to pass NDMP backup or restore environment variables via the Data Management Agent (DMA) in Bareos to the remote NDMP Data Agent. You can have zero or more metatags which are all passed to the remote NDMP Data Agent. ### FileSet Examples¶ The following is an example of a valid FileSet resource definition. Note, the first Include pulls in the contents of the file /etc/backup.list when Bareos is started (i.e. the @), and that file must have each filename to be backed up preceded by a File = and on a separate line. FileSet using import FileSet { Name = "Full Set" Include { Options { Compression=GZIP signature=SHA1 Sparse = yes } @/etc/backup.list } Include { Options { wildfile = "*.o" wildfile = "*.exe" Exclude = yes } File = /root/myfile File = /usr/lib/another_file } }  In the above example, all the files contained in /etc/backup.list will be compressed with GZIP compression, an SHA1 signature will be computed on the file’s contents (its data), and sparse file handling will apply. The two directories /root/myfile and /usr/lib/another_file will also be saved without any options, but all files in those directories with the extensions .o and .exe will be excluded. Let’s say that you now want to exclude the directory /tmp. The simplest way to do so is to add an exclude directive that lists /tmp. The example above would then become: extended FileSet excluding /tmp FileSet { Name = "Full Set" Include { Options { Compression=GZIP signature=SHA1 Sparse = yes } @/etc/backup.list } Include { Options { wildfile = "*.o" wildfile = "*.exe" Exclude = yes } File = /root/myfile File = /usr/lib/another_file } Exclude { File = /tmp # don't add trailing / } }  You can add wild-cards to the File directives listed in the Exclude directory, but you need to take care because if you exclude a directory, it and all files and directories below it will also be excluded. Now lets take a slight variation on the above and suppose you want to save all your whole filesystem except /tmp. The problem that comes up is that Bareos will not normally cross from one filesystem to another. Doing a df command, you get the following output: df user@host:~$ df
Filesystem      1k-blocks      Used Available Use% Mounted on
/dev/hda5         5044156    439232   4348692  10% /
/dev/hda1           62193      4935     54047   9% /boot
/dev/hda9        20161172   5524660  13612372  29% /home
/dev/hda2           62217      6843     52161  12% /rescue
/dev/hda8         5044156     42548   4745376   1% /tmp
/dev/hda6         5044156   2613132   2174792  55% /usr
none               127708         0    127708   0% /dev/shm
//minimatou/c$14099200 9895424 4203776 71% /mnt/mmatou lmatou:/ 1554264 215884 1258056 15% /mnt/matou lmatou:/home 2478140 1589952 760072 68% /mnt/matou/home lmatou:/usr 1981000 1199960 678628 64% /mnt/matou/usr lpmatou:/ 995116 484112 459596 52% /mnt/pmatou lpmatou:/home 19222656 2787880 15458228 16% /mnt/pmatou/home lpmatou:/usr 2478140 2038764 311260 87% /mnt/pmatou/usr deuter:/ 4806936 97684 4465064 3% /mnt/deuter deuter:/home 4806904 280100 4282620 7% /mnt/deuter/home deuter:/files 44133352 27652876 14238608 67% /mnt/deuter/files  And we see that there are a number of separate filesystems (/ /boot /home /rescue /tmp and /usr not to mention mounted systems). If you specify only / in your Include list, Bareos will only save the Filesystem /dev/hda5. To save all filesystems except /tmp with out including any of the Samba or NFS mounted systems, and explicitly excluding a /tmp, /proc, .journal, and .autofsck, which you will not want to be saved and restored, you can use the following: FileSet mount points FileSet { Name = Include_example Include { Options { wilddir = /proc wilddir = /tmp wildfile = "/.journal" wildfile = "/.autofsck" exclude = yes } File = / File = /boot File = /home File = /rescue File = /usr } }  Since /tmp is on its own filesystem and it was not explicitly named in the Include list, it is not really needed in the exclude list. It is better to list it in the Exclude list for clarity, and in case the disks are changed so that it is no longer in its own partition. Now, lets assume you only want to backup .Z and .gz files and nothing else. This is a bit trickier because Bareos by default will select everything to backup, so we must exclude everything but .Z and .gz files. If we take the first example above and make the obvious modifications to it, we might come up with a FileSet that looks like this: Non-working example FileSet { Name = "Full Set" Include { !!!!!!!!!!!! Options { This wildfile = "*.Z" example wildfile = "*.gz" doesn't work } !!!!!!!!!!!! File = /myfile } }  The *.Z and *.gz files will indeed be backed up, but all other files that are not matched by the Options directives will automatically be backed up too (i.e. that is the default rule). To accomplish what we want, we must explicitly exclude all other files. We do this with the following: Exclude all except specific wildcards FileSet { Name = "Full Set" Include { Options { wildfile = "*.Z" wildfile = "*.gz" } Options { Exclude = yes RegexFile = ".*" } File = /myfile } }  The “trick” here was to add a RegexFile expression that matches all files. It does not match directory names, so all directories in /myfile will be backed up (the directory entry) and any *.Z and *.gz files contained in them. If you know that certain directories do not contain any *.Z or *.gz files and you do not want the directory entries backed up, you will need to explicitly exclude those directories. Backing up a directory entries is not very expensive. Bareos uses the system regex library and some of them are different on different OSes. The above has been reported not to work on FreeBSD. This can be tested by using the estimate job=job-name listing command in the console and adapting the RegexFile expression appropriately. Please be aware that allowing Bareos to traverse or change file systems can be very dangerous. For example, with the following: backup all filesystem below /mnt/matou (use with care) FileSet { Name = "Bad example" Include { Options { onefs=no } File = /mnt/matou } }  you will be backing up an NFS mounted partition (/mnt/matou), and since onefs is set to no, Bareos will traverse file systems. Now if /mnt/matou has the current machine’s file systems mounted, as is often the case, you will get yourself into a recursive loop and the backup will never end. As a final example, let’s say that you have only one or two subdirectories of /home that you want to backup. For example, you want to backup only subdirectories beginning with the letter a and the letter b – i.e. /home/a* and /home/b*. Now, you might first try: Non-working example FileSet { Name = "Full Set" Include { Options { wilddir = "/home/a*" wilddir = "/home/b*" } File = /home } }  The problem is that the above will include everything in /home. To get things to work correctly, you need to start with the idea of exclusion instead of inclusion. So, you could simply exclude all directories except the two you want to use: Exclude by regex FileSet { Name = "Full Set" Include { Options { RegexDir = "^/home/[c-z]" exclude = yes } File = /home } }  And assuming that all subdirectories start with a lowercase letter, this would work. An alternative would be to include the two subdirectories desired and exclude everything else: Include and Exclude FileSet { Name = "Full Set" Include { Options { wilddir = "/home/a*" wilddir = "/home/b*" } Options { RegexDir = ".*" exclude = yes } File = /home } }  The following example shows how to back up only the My Pictures directory inside the My Documents directory for all users in C:/Documents and Settings, i.e. everything matching the pattern: C:/Documents and Settings/*/My Documents/My Pictures/* To understand how this can be achieved, there are two important points to remember: Firstly, Bareos walks over the filesystem depth-first starting from the File = lines. It stops descending when a directory is excluded, so you must include all ancestor directories of each directory containing files to be included. Secondly, each directory and file is compared to the Options clauses in the order they appear in the FileSet. When a match is found, no further clauses are compared and the directory or file is either included or excluded. The FileSet resource definition below implements this by including specifc directories and files and excluding everything else. Include/Exclude example FileSet { Name = "AllPictures" Include { File = "C:/Documents and Settings" Options { signature = SHA1 verify = s1 IgnoreCase = yes # Include all users' directories so we reach the inner ones. Unlike a # WildDir pattern ending in *, this RegExDir only matches the top-level # directories and not any inner ones. RegExDir = "^C:/Documents and Settings/[^/]+$"

# Ditto all users' My Documents directories.
WildDir = "C:/Documents and Settings/*/My Documents"

# Ditto all users' My Documents/My Pictures directories.
WildDir = "C:/Documents and Settings/*/My Documents/My Pictures"

# Include the contents of the My Documents/My Pictures directories and
# any subdirectories.
Wild = "C:/Documents and Settings/*/My Documents/My Pictures/*"
}

Options {
Exclude = yes
IgnoreCase = yes

# Exclude everything else, in particular any files at the top level and
# any other directories or files in the users' directories.
Wild = "C:/Documents and Settings/*"
}
}
}


### Windows FileSets¶

If you are entering Windows file names, the directory path may be preceded by the drive and a colon (as in c:). However, the path separators must be specified in Unix convention (i.e. forward slash (/)). If you wish to include a quote in a file name, precede the quote with a backslash (). For example you might use the following for a Windows machine to backup the “My Documents” directory:

Windows FileSet
FileSet {
Name = "Windows Set"
Include {
Options {
WildFile = "*.obj"
WildFile = "*.exe"
exclude = yes
}
File = "c:/My Documents"
}
}


For exclude lists to work correctly on Windows, you must observe the following rules:

• Filenames are case sensitive, so you must use the correct case.
• To exclude a directory, you must not have a trailing slash on the directory name.
• If you have spaces in your filename, you must enclose the entire name in double-quote characters (“). Trying to use a backslash before the space will not work.
• If you are using the old Exclude syntax (noted below), you may not specify a drive letter in the exclude. The new syntax noted above should work fine including driver letters.

Thanks to Thiago Lima for summarizing the above items for us. If you are having difficulties getting includes or excludes to work, you might want to try using the estimate job=xxx listing command documented in the Console chapter of this manual.

On Win32 systems, if you move a directory or file or rename a file into the set of files being backed up, and a Full backup has already been made, Bareos will not know there are new files to be saved during an Incremental or Differential backup (blame Microsoft, not us). To avoid this problem, please copy any new directory or files into the backup area. If you do not have enough disk to copy the directory or files, move them, but then initiate a Full backup.

#### Example Fileset for Windows¶

The following example demostrates a Windows FileSet. It backups all data from all fixed drives and only excludes some Windows temporary data.

Windows All Drives FileSet
FileSet {
Name = "Windows All Drives"
Enable VSS = yes
Include {
Options {
Signature = MD5
Drive Type = fixed
IgnoreCase = yes
WildFile = "[A-Z]:/pagefile.sys"
WildDir = "[A-Z]:/RECYCLER"
WildDir = "[A-Z]:/$RECYCLE.BIN" WildDir = "[A-Z]:/System Volume Information" Exclude = yes } File = / } }  File = / includes all Windows drives. Using Drive Type = fixed excludes drives like USB-Stick or CD-ROM Drive. Using WildDir = "[A-Z]:/RECYCLER" excludes the backup of the directory RECYCLER from all drives. ### Testing Your FileSet¶ If you wish to get an idea of what your FileSet will really backup or if your exclusion rules will work correctly, you can test it by using the estimate command. As an example, suppose you add the following test FileSet: FileSet for all *.c files FileSet { Name = Test Include { File = /home/xxx/test Options { regex = ".*\.c$"
}
}
}


You could then add some test files to the directory /home/xxx/test and use the following command in the console:

estimate
estimate job=<any-job-name> listing client=<desired-client> fileset=Test


to give you a listing of all files that match. In the above example, it should be only files with names ending in .c.

## Client Resource¶

The Client (or FileDaemon) resource defines the attributes of the Clients that are served by this Director; that is the machines that are to be backed up. You will need one Client resource definition for each machine to be backed up.

configuration directive name type of data default value remark
Address (Dir->Client) = STRING   required
Auth Type (Dir->Client) = AUTH_TYPE None
Auto Prune (Dir->Client) = BOOLEAN no
Catalog (Dir->Client) = RES
Connection From Client To Director (Dir->Client) = BOOLEAN no
Connection From Director To Client (Dir->Client) = BOOLEAN yes
Description (Dir->Client) = STRING
Enabled (Dir->Client) = BOOLEAN yes
FD Address (Dir->Client) = STRING   alias
FD Password (Dir->Client) = AUTOPASSWORD   alias
FD Port (Dir->Client) = PINT32 9102 alias
File Retention (Dir->Client) = TIME 5184000
Hard Quota (Dir->Client) = SIZE64 0
Heartbeat Interval (Dir->Client) = TIME 0
Job Retention (Dir->Client) = TIME 15552000
Lan Address (Dir->Client) = STRING
Maximum Bandwidth Per Job (Dir->Client) = SPEED
Maximum Concurrent Jobs (Dir->Client) = PINT32 1
Name (Dir->Client) = NAME   required
NDMP Block Size (Dir->Client) = SIZE32 64512
NDMP Log Level (Dir->Client) = PINT32 4
NDMP Use LMDB (Dir->Client) = BOOLEAN yes
Passive (Dir->Client) = BOOLEAN no
Password (Dir->Client) = AUTOPASSWORD   required
Port (Dir->Client) = PINT32 9102
Protocol (Dir->Client) = AUTH_PROTOCOL_TYPE Native
Quota Include Failed Jobs (Dir->Client) = BOOLEAN yes
Soft Quota (Dir->Client) = SIZE64 0
Soft Quota Grace Period (Dir->Client) = TIME 0
Strict Quotas (Dir->Client) = BOOLEAN no
TLS Allowed CN (Dir->Client) = STRING_LIST
TLS Authenticate (Dir->Client) = BOOLEAN no
TLS CA Certificate Dir (Dir->Client) = DIRECTORY
TLS CA Certificate File (Dir->Client) = DIRECTORY
TLS Certificate (Dir->Client) = DIRECTORY
TLS Certificate Revocation List (Dir->Client) = DIRECTORY
TLS Cipher List (Dir->Client) = DIRECTORY
TLS DH File (Dir->Client) = DIRECTORY
TLS Enable (Dir->Client) = BOOLEAN yes
TLS Key (Dir->Client) = DIRECTORY
TLS Protocol (Dir->Client) = STRING
TLS Require (Dir->Client) = BOOLEAN no
TLS Verify Peer (Dir->Client) = BOOLEAN no
Username (Dir->Client) = STRING
Address
Required: True STRING

Where the address is a host name, a fully qualified domain name, or a network address in dotted quad notation for a Bareos File server daemon. This directive is required.

Auth Type
Type: AUTH_TYPE None

Specifies the authentication type that must be supplied when connecting to a backup protocol that uses a specific authentication type.

Auto Prune
Type: BOOLEAN no

If set to yes, Bareos will automatically apply the File Retention (Dir->Client) period and the Job Retention (Dir->Client) period for the client at the end of the job.

Pruning affects only information in the catalog and not data stored in the backup archives (on Volumes), but if pruning deletes all data referring to a certain volume, the volume is regarded as empty and will possibly be overwritten before the volume retention has expired.

Catalog
Type: RES

This specifies the name of the catalog resource to be used for this Client. If none is specified the first defined catalog is used.

Connection From Client To Director
Type: BOOLEAN no 16.2.2

The Director will accept incoming network connection from this Client.

For details, see Client Initiated Connection.

Connection From Director To Client
Type: BOOLEAN yes 16.2.2

Let the Director initiate the network connection to the Client.

Description
Type: STRING
Enabled
Type: BOOLEAN yes

En- or disable this resource.

FD Address
Type: STRING

FD Password

This directive is an alias.

FD Port
Type: PINT32 9102

This directive is an alias.

Where the port is a port number at which the Bareos File Daemon can be contacted. The default is 9102. For NDMP backups set this to 10000.

File Retention
Type: TIME 5184000

The File Retention directive defines the length of time that Bareos will keep File records in the Catalog database after the End time of the Job corresponding to the File records. When this time period expires and Auto Prune (Dir->Client) = yes, Bareos will prune (remove) File records that are older than the specified File Retention period. Note, this affects only records in the catalog database. It does not affect your archive backups.

File records may actually be retained for a shorter period than you specify on this directive if you specify either a shorter Job Retention (Dir->Client) or a shorter Volume Retention (Dir->Pool) period. The shortest retention period of the three takes precedence.

The default is 60 days.

Hard Quota
Type: SIZE64 0

The amount of data determined by the Hard Quota directive sets the hard limit of backup space that cannot be exceeded. This is the maximum amount this client can back up before any backup job will be aborted.

If the Hard Quota is exceeded, the running job is terminated:

Fatal error: append.c:218 Quota Exceeded. Job Terminated.

Heartbeat Interval
Type: TIME 0

This directive is optional and if specified will cause the Director to set a keepalive interval (heartbeat) in seconds on each of the sockets it opens for the Storage resource. If set, this value overrides Heartbeat Interval (Dir->Director).

Job Retention
Type: TIME 15552000

The Job Retention directive defines the length of time that Bareos will keep Job records in the Catalog database after the Job End time. When this time period expires and Auto Prune (Dir->Client) = yes Bareos will prune (remove) Job records that are older than the specified File Retention period. As with the other retention periods, this affects only records in the catalog and not data in your archive backup.

If a Job record is selected for pruning, all associated File and JobMedia records will also be pruned regardless of the File Retention period set. As a consequence, you normally will set the File retention period to be less than the Job retention period. The Job retention period can actually be less than the value you specify here if you set the Volume Retention (Dir->Pool) directive to a smaller duration. This is because the Job retention period and the Volume retention period are independently applied, so the smaller of the two takes precedence.

The default is 180 days.

Lan Address
Type: STRING 16.2.6

Sets additional address used for connections between Client and Storage Daemon inside separate network.

This directive might be useful in network setups where the Bareos Director and Bareos Storage Daemon need different addresses to communicate with the Bareos File Daemon.

For details, see Using different IP Adresses for SD – FD Communication.

This directive corresponds to Lan Address (Dir->Storage).

Maximum Bandwidth Per Job
Type: SPEED

The speed parameter specifies the maximum allowed bandwidth that a job may use when started for this Client.

Maximum Concurrent Jobs
Type: PINT32 1

This directive specifies the maximum number of Jobs with the current Client that can run concurrently. Note, this directive limits only Jobs for Clients with the same name as the resource in which it appears. Any other restrictions on the maximum concurrent jobs such as in the Director, Job or Storage resources will also apply in addition to any limit specified here.

Name
Required: True NAME

The name of the resource.

The client name which will be used in the Job resource directive or in the console run command.

NDMP Block Size
Type: SIZE32 64512

This directive sets the default NDMP blocksize for this client.

NDMP Log Level
Type: PINT32 4

This directive sets the loglevel for the NDMP protocol library.

NDMP Use LMDB
Type: BOOLEAN yes
Passive
Type: BOOLEAN no 13.2.0

If enabled, the Storage Daemon will initiate the network connection to the Client. If disabled, the Client will initiate the network connection to the Storage Daemon.

The normal way of initializing the data channel (the channel where the backup data itself is transported) is done by the file daemon (client) that connects to the storage daemon.

By using the client passive mode, the initialization of the datachannel is reversed, so that the storage daemon connects to the filedaemon.

See chapter Passive Client.

Password

This is the password to be used when establishing a connection with the File services, so the Client configuration file on the machine to be backed up must have the same password defined for this Director.

Port
Type: PINT32 9102
Protocol
Type: AUTH_PROTOCOL_TYPE Native 13.2.0

The backup protocol to use to run the Job.

Currently the director understands the following protocols:

1. Native - The native Bareos protocol
2. NDMP - The NDMP protocol
Quota Include Failed Jobs
Type: BOOLEAN yes

When calculating the amount a client used take into consideration any failed Jobs.

Soft Quota
Type: SIZE64 0

This is the amount after which there will be a warning issued that a client is over his softquota. A client can keep doing backups until it hits the hard quota or when the Soft Quota Grace Period (Dir->Client) is expired.

Soft Quota Grace Period
Type: TIME 0

Time allowed for a client to be over its Soft Quota (Dir->Client) before it will be enforced.

When the amount of data backed up by the client outruns the value specified by the Soft Quota directive, the next start of a backup job will start the soft quota grace time period. This is written to the job log:

Error: Softquota Exceeded, Grace Period starts now.


In the Job Overview, the value of Grace Expiry Date: will then change from Soft Quota was never exceeded to the date when the grace time expires, e.g. 11-Dec-2012 04:09:05.

During that period, it is possible to do backups even if the total amount of stored data exceeds the limit specified by soft quota.

If in this state, the job log will write:

Error: Softquota Exceeded, will be enforced after Grace Period expires.


After the grace time expires, in the next backup job of the client, the value for Burst Quota will be set to the value that the client has stored at this point in time. Also, the job will be terminated. The following information in the job log shows what happened:

Warning: Softquota Exceeded and Grace Period expired.
Setting Burst Quota to 122880000 Bytes.
Fatal error: Soft Quota Exceeded / Grace Time expired. Job terminated.


At this point, it is not possible to do any backup of the client. To be able to do more backups, the amount of stored data for this client has to fall under the burst quota value.

Strict Quotas
Type: BOOLEAN no

The directive Strict Quotas determines whether, after the Grace Time Period is over, to enforce the Burst Limit (Strict Quotas = No) or the Soft Limit (Strict Quotas = Yes).

The Job Log shows either

Softquota Exceeded, enforcing Burst Quota Limit.


or

Softquota Exceeded, enforcing Strict Quota Limit.

TLS Allowed CN
Type: STRING_LIST

“Common Name”s (CNs) of the allowed peer certificates.

TLS Authenticate
Type: BOOLEAN no

Use TLS only to authenticate, not for encryption.

TLS CA Certificate Dir
Type: DIRECTORY

Path of a TLS CA certificate directory.

TLS CA Certificate File
Type: DIRECTORY

Path of a PEM encoded TLS CA certificate(s) file.

TLS Certificate
Type: DIRECTORY

Path of a PEM encoded TLS certificate.

TLS Certificate Revocation List
Type: DIRECTORY

Path of a Certificate Revocation List file.

TLS Cipher List
Type: DIRECTORY

List of valid TLS Ciphers.

TLS DH File
Type: DIRECTORY

Path to PEM encoded Diffie-Hellman parameter file. If this directive is specified, DH key exchange will be used for the ephemeral keying, allowing for forward secrecy of communications.

TLS Enable
Type: BOOLEAN yes

Enable TLS support.

Bareos can be configured to encrypt all its network traffic. See chapter TLS Configuration Directives to see, how the Bareos Director (and the other components) must be configured to use TLS.

TLS Key
Type: DIRECTORY

Path of a PEM encoded private key. It must correspond to the specified “TLS Certificate”.

TLS Protocol
Type: STRING 20.0.0

OpenSSL Configuration: Protocol

TLS Require
Type: BOOLEAN no

Without setting this to yes, Bareos can fall back to use unencrypted connections. Enabling this implicitly sets “TLS Enable = yes”.

TLS Verify Peer
Type: BOOLEAN no

If disabled, all certificates signed by a known CA will be accepted. If enabled, the CN of a certificate must the Address or in the “TLS Allowed CN” list.

Username
Type: STRING

Specifies the username that must be supplied when authenticating. Only used for the non Native protocols at the moment.

The following is an example of a valid Client resource definition:

Minimal client resource definition in bareos-dir.conf
Client {
Name = client1-fd
}


The following is an example of a Quota Configuration in Client resource:

Quota Configuration in Client resource
Client {
Name = client1-fd

# Quota
Soft Quota = 50 mb
Soft Quota Grace Period = 2 days
Strict Quotas = Yes
Hard Quota = 150 mb
Quota Include Failed Jobs = yes
}


## Storage Resource¶

The Storage resource defines which Storage daemons are available for use by the Director.

configuration directive name type of data default value remark
Address (Dir->Storage) = STRING   required
Allow Compression (Dir->Storage) = BOOLEAN yes
Auth Type (Dir->Storage) = AUTH_TYPE None
Auto Changer (Dir->Storage) = BOOLEAN no
Cache Status Interval (Dir->Storage) = TIME 30
Collect Statistics (Dir->Storage) = BOOLEAN no
Description (Dir->Storage) = STRING
Device (Dir->Storage) = DEVICE   required
Enabled (Dir->Storage) = BOOLEAN yes
Heartbeat Interval (Dir->Storage) = TIME 0
Lan Address (Dir->Storage) = STRING
Maximum Bandwidth Per Job (Dir->Storage) = SPEED
Maximum Concurrent Jobs (Dir->Storage) = PINT32 1
Maximum Concurrent Read Jobs (Dir->Storage) = PINT32 0
Media Type (Dir->Storage) = STRNAME   required
Name (Dir->Storage) = NAME   required
NDMP Changer Device (Dir->Storage) = STRNAME
Paired Storage (Dir->Storage) = RES
Password (Dir->Storage) = AUTOPASSWORD   required
Port (Dir->Storage) = PINT32 9103
Protocol (Dir->Storage) = AUTH_PROTOCOL_TYPE Native
SD Address (Dir->Storage) = STRING   alias
SD Password (Dir->Storage) = AUTOPASSWORD   alias
SD Port (Dir->Storage) = PINT32 9103 alias
TLS Allowed CN (Dir->Storage) = STRING_LIST
TLS Authenticate (Dir->Storage) = BOOLEAN no
TLS CA Certificate Dir (Dir->Storage) = DIRECTORY
TLS CA Certificate File (Dir->Storage) = DIRECTORY
TLS Certificate (Dir->Storage) = DIRECTORY
TLS Certificate Revocation List (Dir->Storage) = DIRECTORY
TLS Cipher List (Dir->Storage) = DIRECTORY
TLS DH File (Dir->Storage) = DIRECTORY
TLS Enable (Dir->Storage) = BOOLEAN yes
TLS Key (Dir->Storage) = DIRECTORY
TLS Protocol (Dir->Storage) = STRING
TLS Require (Dir->Storage) = BOOLEAN no
TLS Verify Peer (Dir->Storage) = BOOLEAN no
Username (Dir->Storage) = STRING
Address
Required: True STRING

Where the address is a host name, a fully qualified domain name, or an IP address. Please note that the <address> as specified here will be transmitted to the File daemon who will then use it to contact the Storage daemon. Hence, it is not, a good idea to use localhost as the name but rather a fully qualified machine name or an IP address. This directive is required.

Allow Compression
Type: BOOLEAN yes

This directive is optional, and if you specify No, it will cause backups jobs running on this storage resource to run without client File Daemon compression. This effectively overrides compression options in FileSets used by jobs which use this storage resource.

Auth Type
Type: AUTH_TYPE None

Specifies the authentication type that must be supplied when connecting to a backup protocol that uses a specific authentication type.

Auto Changer
Type: BOOLEAN no

When Device (Dir->Storage) refers to an Auto Changer (Autochanger (Sd->Device)), this directive must be set to yes.

If you specify yes,

• Volume management command like label or add will request a Autochanger Slot number.
• Bareos will prefer Volumes, that are in a Auto Changer slot. If none of theses volumes can be used, even after recycling, pruning, …, Bareos will search for any volume of the same Media Type (Dir->Storage) whether or not in the magazine.

Please consult the Autochanger Support chapter for details.

Cache Status Interval
Type: TIME 30
Collect Statistics
Type: BOOLEAN no

Collect statistic information. These information will be collected by the Director (see Statistics Collect Interval (Dir->Director)) and stored in the Catalog.

Description
Type: STRING

Information.

Device
Required: True DEVICE

If Protocol (Dir->Job) is not NDMP_NATIVE (default is Protocol (Dir->Job) = Native), this directive refers to one or multiple Name (Sd->Device) or a single Name (Sd->Autochanger).

If an Autochanger should be used, it had to refer to a configured Name (Sd->Autochanger). In this case, also set Auto Changer (Dir->Storage) = yes.

Otherwise it refers to one or more configured Name (Sd->Device), see Using Multiple Storage Devices.

This name is not the physical device name, but the logical device name as defined in the Bareos Storage Daemon resource.

If Protocol (Dir->Job) = NDMP_NATIVE, it refers to tape devices on the NDMP Tape Agent, see NDMP_NATIVE.

Enabled
Type: BOOLEAN yes

En- or disable this resource.

Heartbeat Interval
Type: TIME 0

This directive is optional and if specified will cause the Director to set a keepalive interval (heartbeat) in seconds on each of the sockets it opens for the Storage resource. This value will override any specified at the Director level. It is implemented only on systems (Linux, …) that provide the setsockopt TCP_KEEPIDLE function. The default value is zero, which means no change is made to the socket.

Lan Address
Type: STRING 16.2.6

Sets additional address used for connections between Client and Storage Daemon inside separate network.

This directive might be useful in network setups where the Bareos Director and Bareos File Daemon need different addresses to communicate with the Bareos Storage Daemon.

For details, see Using different IP Adresses for SD – FD Communication.

This directive corresponds to Lan Address (Dir->Client).

Maximum Bandwidth Per Job
Type: SPEED
Maximum Concurrent Jobs
Type: PINT32 1

This directive specifies the maximum number of Jobs with the current Storage resource that can run concurrently. Note, this directive limits only Jobs for Jobs using this Storage daemon. Any other restrictions on the maximum concurrent jobs such as in the Director, Job or Client resources will also apply in addition to any limit specified here.

If you set the Storage daemon’s number of concurrent jobs greater than one, we recommend that you read Concurrent Jobs and/or turn data spooling on as documented in Data Spooling.

Maximum Concurrent Read Jobs
Type: PINT32 0

This directive specifies the maximum number of Jobs with the current Storage resource that can read concurrently.

Media Type
Required: True STRNAME

This directive specifies the Media Type to be used to store the data. This is an arbitrary string of characters up to 127 maximum that you define. It can be anything you want. However, it is best to make it descriptive of the storage media (e.g. File, DAT, “HP DLT8000”, 8mm, …). In addition, it is essential that you make the Media Type specification unique for each storage media type. If you have two DDS-4 drives that have incompatible formats, or if you have a DDS-4 drive and a DDS-4 autochanger, you almost certainly should specify different Media Types. During a restore, assuming a DDS-4 Media Type is associated with the Job, Bareos can decide to use any Storage daemon that supports Media Type DDS-4 and on any drive that supports it.

If you are writing to disk Volumes, you must make doubly sure that each Device resource defined in the Storage daemon (and hence in the Director’s conf file) has a unique media type. Otherwise Bareos may assume, these Volumes can be mounted and read by any Storage daemon File device.

Currently Bareos permits only a single Media Type per Storage Device definition. Consequently, if you have a drive that supports more than one Media Type, you can give a unique string to Volumes with different intrinsic Media Type (Media Type = DDS-3-4 for DDS-3 and DDS-4 types), but then those volumes will only be mounted on drives indicated with the dual type (DDS-3-4).

If you want to tie Bareos to using a single Storage daemon or drive, you must specify a unique Media Type for that drive. This is an important point that should be carefully understood. Note, this applies equally to Disk Volumes. If you define more than one disk Device resource in your Storage daemon’s conf file, the Volumes on those two devices are in fact incompatible because one can not be mounted on the other device since they are found in different directories. For this reason, you probably should use two different Media Types for your two disk Devices (even though you might think of them as both being File types). You can find more on this subject in the Basic Volume Management chapter of this manual.

The MediaType specified in the Director’s Storage resource, must correspond to the Media Type specified in the Device resource of the Storage daemon configuration file. This directive is required, and it is used by the Director and the Storage daemon to ensure that a Volume automatically selected from the Pool corresponds to the physical device. If a Storage daemon handles multiple devices (e.g. will write to various file Volumes on different partitions), this directive allows you to specify exactly which device.

As mentioned above, the value specified in the Director’s Storage resource must agree with the value specified in the Device resource in the Storage daemon’s configuration file. It is also an additional check so that you don’t try to write data for a DLT onto an 8mm device.

Name
Required: True NAME

The name of the resource.

The name of the storage resource. This name appears on the Storage directive specified in the Job resource and is required.

NDMP Changer Device
Type: STRNAME 16.2.4

Allows direct control of a Storage Daemon Auto Changer device by the Director. Only used in NDMP_NATIVE environments.

Paired Storage
Type: RES

For NDMP backups this points to the definition of the Native Storage that is accesses via the NDMP protocol. For now we only support NDMP backups and restores to access Native Storage Daemons via the NDMP protocol. In the future we might allow to use Native NDMP storage which is not bound to a Bareos Storage Daemon.

Password

This is the password to be used when establishing a connection with the Storage services. This same password also must appear in the Director resource of the Storage daemon’s configuration file. This directive is required.

Port
Type: PINT32 9103

Where port is the port to use to contact the storage daemon for information and to start jobs. This same port number must appear in the Storage resource of the Storage daemon’s configuration file.

Protocol
Type: AUTH_PROTOCOL_TYPE Native
SD Address
Type: STRING

SD Password

SD Port
Type: PINT32 9103

Alias for Port.

TLS Allowed CN
Type: STRING_LIST

“Common Name”s (CNs) of the allowed peer certificates.

TLS Authenticate
Type: BOOLEAN no

Use TLS only to authenticate, not for encryption.

TLS CA Certificate Dir
Type: DIRECTORY

Path of a TLS CA certificate directory.

TLS CA Certificate File
Type: DIRECTORY

Path of a PEM encoded TLS CA certificate(s) file.

TLS Certificate
Type: DIRECTORY

Path of a PEM encoded TLS certificate.

TLS Certificate Revocation List
Type: DIRECTORY

Path of a Certificate Revocation List file.

TLS Cipher List
Type: DIRECTORY

List of valid TLS Ciphers.

TLS DH File
Type: DIRECTORY

Path to PEM encoded Diffie-Hellman parameter file. If this directive is specified, DH key exchange will be used for the ephemeral keying, allowing for forward secrecy of communications.

TLS Enable
Type: BOOLEAN yes

Enable TLS support.

Bareos can be configured to encrypt all its network traffic. For details, refer to chapter TLS Configuration Directives.

TLS Key
Type: DIRECTORY

Path of a PEM encoded private key. It must correspond to the specified “TLS Certificate”.

TLS Protocol
Type: STRING 20.0.0

OpenSSL Configuration: Protocol

TLS Require
Type: BOOLEAN no

Without setting this to yes, Bareos can fall back to use unencrypted connections. Enabling this implicitly sets “TLS Enable = yes”.

TLS Verify Peer
Type: BOOLEAN no

If disabled, all certificates signed by a known CA will be accepted. If enabled, the CN of a certificate must the Address or in the “TLS Allowed CN” list.

Username
Type: STRING

The following is an example of a valid Storage resource definition:

Storage resource (tape) example
Storage {
Name = DLTDrive
Device = "HP DLT 80"    # same as Device in Storage daemon
Media Type = DLT8000    # same as MediaType in Storage daemon
}


## Pool Resource¶

The Pool resource defines the set of storage Volumes (tapes or files) to be used by Bareos to write the data. By configuring different Pools, you can determine which set of Volumes (media) receives the backup data. This permits, for example, to store all full backup data on one set of Volumes and all incremental backups on another set of Volumes. Alternatively, you could assign a different set of Volumes to each machine that you backup. This is most easily done by defining multiple Pools.

Another important aspect of a Pool is that it contains the default attributes (Maximum Jobs, Retention Period, Recycle flag, …) that will be given to a Volume when it is created. This avoids the need for you to answer a large number of questions when labeling a new Volume. Each of these attributes can later be changed on a Volume by Volume basis using the update command in the console program. Note that you must explicitly specify which Pool Bareos is to use with each Job. Bareos will not automatically search for the correct Pool.

To use a Pool, there are three distinct steps. First the Pool must be defined in the Director’s configuration. Then the Pool must be written to the Catalog database. This is done automatically by the Director each time that it starts. Finally, if you change the Pool definition in the Director’s configuration file and restart Bareos, the pool will be updated alternatively you can use the update pool console command to refresh the database image. It is this database image rather than the Director’s resource image that is used for the default Volume attributes. Note, for the pool to be automatically created or updated, it must be explicitly referenced by a Job resource.

If automatic labeling is not enabled (see Automatic Volume Labeling) the physical media must be manually labeled. The labeling can either be done with the label command in the console program or using the btape program. The preferred method is to use the label command in the console program. Generally, automatic labeling is enabled for Device Type (Sd->Device) = Fileand disabled for Device Type (Sd->Device) = Tape.

Finally, you must add Volume names (and their attributes) to the Pool. For Volumes to be used by Bareos they must be of the same Media Type (Sd->Device) as the archive device specified for the job (i.e. if you are going to back up to a DLT device, the Pool must have DLT volumes defined since 8mm volumes cannot be mounted on a DLT drive). The Media Type (Sd->Device) has particular importance if you are backing up to files. When running a Job, you must explicitly specify which Pool to use. Bareos will then automatically select the next Volume to use from the Pool, but it will ensure that the Media Type (Sd->Device) of any Volume selected from the Pool is identical to that required by the Storage resource you have specified for the Job.

If you use the label command in the console program to label the Volumes, they will automatically be added to the Pool, so this last step is not normally required.

It is also possible to add Volumes to the database without explicitly labeling the physical volume. This is done with the add console command.

As previously mentioned, each time Bareos starts, it scans all the Pools associated with each Catalog, and if the database record does not already exist, it will be created from the Pool Resource definition. If you change the Pool definition, you manually have to call update pool command in the console program to propagate the changes to existing volumes.

The Pool Resource defined in the Director’s configuration may contain the following directives:

configuration directive name type of data default value remark
Action On Purge (Dir->Pool) = ACTION_ON_PURGE
Auto Prune (Dir->Pool) = BOOLEAN yes
Catalog (Dir->Pool) = RES
Catalog Files (Dir->Pool) = BOOLEAN yes
Cleaning Prefix (Dir->Pool) = STRNAME CLN
Description (Dir->Pool) = STRING
File Retention (Dir->Pool) = TIME
Job Retention (Dir->Pool) = TIME
Label Format (Dir->Pool) = STRNAME
Label Type (Dir->Pool) = LABEL
Maximum Block Size (Dir->Pool) = SIZE32
Maximum Volume Bytes (Dir->Pool) = SIZE64
Maximum Volume Files (Dir->Pool) = PINT32
Maximum Volume Jobs (Dir->Pool) = PINT32
Maximum Volumes (Dir->Pool) = PINT32
Migration High Bytes (Dir->Pool) = SIZE64
Migration Low Bytes (Dir->Pool) = SIZE64
Migration Time (Dir->Pool) = TIME
Minimum Block Size (Dir->Pool) = SIZE32
Name (Dir->Pool) = NAME   required
Next Pool (Dir->Pool) = RES
Pool Type (Dir->Pool) = POOLTYPE Backup
Purge Oldest Volume (Dir->Pool) = BOOLEAN no
Recycle (Dir->Pool) = BOOLEAN yes
Recycle Current Volume (Dir->Pool) = BOOLEAN no
Recycle Oldest Volume (Dir->Pool) = BOOLEAN no
Recycle Pool (Dir->Pool) = RES
Scratch Pool (Dir->Pool) = RES
Storage (Dir->Pool) = RESOURCE_LIST
Use Catalog (Dir->Pool) = BOOLEAN yes
Volume Retention (Dir->Pool) = TIME 31536000
Volume Use Duration (Dir->Pool) = TIME
Action On Purge
Type: ACTION_ON_PURGE

The directive Action On Purge=Truncate instructs Bareos to truncate the volume when it is purged with the purge volume action=truncate command. It is useful to prevent disk based volumes from consuming too much space.

Auto Prune
Type: BOOLEAN yes

If Auto Prune=yes, the Volume Retention (Dir->Pool) period is automatically applied when a new Volume is needed and no appendable Volumes exist in the Pool. Volume pruning causes expired Jobs (older than the Volume Retention (Dir->Pool) period) to be deleted from the Catalog and permits possible recycling of the Volume.

Catalog
Type: RES

This specifies the name of the catalog resource to be used for this Pool. When a catalog is defined in a Pool it will override the definition in the client (and the Catalog definition in a Job since Version >= 13.4.0). e.g. this catalog setting takes precedence over any other definition.

Catalog Files
Type: BOOLEAN yes

This directive defines whether or not you want the names of the files that were saved to be put into the catalog. If disabled, the Catalog database will be significantly smaller. The disadvantage is that you will not be able to produce a Catalog listing of the files backed up for each Job (this is often called Browsing). Also, without the File entries in the catalog, you will not be able to use the Console restore command nor any other command that references File entries.

Cleaning Prefix
Type: STRNAME CLN

This directive defines a prefix string, which if it matches the beginning of a Volume name during labeling of a Volume, the Volume will be defined with the VolStatus set to Cleaning and thus Bareos will never attempt to use this tape. This is primarily for use with autochangers that accept barcodes where the convention is that barcodes beginning with CLN are treated as cleaning tapes.

The default value for this directive is consequently set to CLN, so that in most cases the cleaning tapes are automatically recognized without configuration. If you use another prefix for your cleaning tapes, you can set this directive accordingly.

Description
Type: STRING
File Retention
Type: TIME

The File Retention directive defines the length of time that Bareos will keep File records in the Catalog database after the End time of the Job corresponding to the File records.

This directive takes precedence over Client directives of the same name. For example, you can decide to increase Retention times for Archive or OffSite Pool.

Note, this affects only records in the catalog database. It does not affect your archive backups.

For more information see Client documentation about File Retention (Dir->Client)

Job Retention
Type: TIME

The Job Retention directive defines the length of time that Bareos will keep Job records in the Catalog database after the Job End time. As with the other retention periods, this affects only records in the catalog and not data in your archive backup.

This directive takes precedence over Client directives of the same name. For example, you can decide to increase Retention times for Archive or OffSite Pool.

For more information see Client side documentation Job Retention (Dir->Client)

Label Format
Type: STRNAME

This directive specifies the format of the labels contained in this pool. The format directive is used as a sort of template to create new Volume names during automatic Volume labeling.

The format should be specified in double quotes ("), and consists of letters, numbers and the special characters hyphen (-), underscore (_), colon (:), and period (.), which are the legal characters for a Volume name.

In addition, the format may contain a number of variable expansion characters which will be expanded by a complex algorithm allowing you to create Volume names of many different formats. In all cases, the expansion process must resolve to the set of characters noted above that are legal Volume names. Generally, these variable expansion characters begin with a dollar sign (\$) or a left bracket ([). For more details on variable expansion, please see Variable Expansion on Volume Labels.

If no variable expansion characters are found in the string, the Volume name will be formed from the format string appended with the a unique number that increases. If you do not remove volumes from the pool, this number should be the number of volumes plus one, but this is not guaranteed. The unique number will be edited as four digits with leading zeros. For example, with a Label Format = “File-“, the first volumes will be named File-0001, File-0002, …

In almost all cases, you should enclose the format specification (part after the equal sign) in double quotes (").

Label Type
Type: LABEL

This directive is implemented in the Director Pool resource and in the SD Device resource (Label Type (Sd->Device)). If it is specified in the SD Device resource, it will take precedence over the value passed from the Director to the SD.

Maximum Block Size
Type: SIZE32 14.2.0

The Maximum Block Size can be defined here to define different block sizes per volume or statically for all volumes at Maximum Block Size (Sd->Device). If not defined, its default is 63 KB. Increasing this value could improve the throughput of writing to tapes.

Warning

However make sure to read the Setting Block Sizes chapter carefully before applying any changes.

Maximum Volume Bytes
Type: SIZE64

This directive specifies the maximum number of bytes that can be written to the Volume. If you specify zero (the default), there is no limit except the physical size of the Volume. Otherwise, when the number of bytes written to the Volume equals size the Volume will be marked Used. When the Volume is marked Used it can no longer be used for appending Jobs, much like the Full status but it can be recycled if recycling is enabled, and thus the Volume can be re-used after recycling. This value is checked and the Used status set while the job is writing to the particular volume.

This directive is particularly useful for restricting the size of disk volumes, and will work correctly even in the case of multiple simultaneous jobs writing to the volume.

The value defined by this directive in the bareos-dir.conf file is the default value used when a Volume is created. Once the volume is created, changing the value in the bareos-dir.conf file will not change what is stored for the Volume. To change the value for an existing Volume you must use the update command in the Console.

Maximum Volume Files
Type: PINT32

This directive specifies the maximum number of files that can be written to the Volume. If you specify zero (the default), there is no limit. Otherwise, when the number of files written to the Volume equals positive-integer the Volume will be marked Used. When the Volume is marked Used it can no longer be used for appending Jobs, much like the Full status but it can be recycled if recycling is enabled and thus used again. This value is checked and the Used status is set only at the end of a job that writes to the particular volume.

The value defined by this directive in the bareos-dir.conf file is the default value used when a Volume is created. Once the volume is created, changing the value in the bareos-dir.conf file will not change what is stored for the Volume. To change the value for an existing Volume you must use the update command in the Console.

Maximum Volume Jobs
Type: PINT32

This directive specifies the maximum number of Jobs that can be written to the Volume. If you specify zero (the default), there is no limit. Otherwise, when the number of Jobs backed up to the Volume equals positive-integer the Volume will be marked Used. When the Volume is marked Used it can no longer be used for appending Jobs, much like the Full status but it can be recycled if recycling is enabled, and thus used again. By setting MaximumVolumeJobs to one, you get the same effect as setting UseVolumeOnce = yes.

The value defined by this directive in the bareos-dir.conf file is the default value used when a Volume is created. Once the volume is created, changing the value in the bareos-dir.conf file will not change what is stored for the Volume. To change the value for an existing Volume you must use the update command in the Console.

If you are running multiple simultaneous jobs, this directive may not work correctly because when a drive is reserved for a job, this directive is not taken into account, so multiple jobs may try to start writing to the Volume. At some point, when the Media record is updated, multiple simultaneous jobs may fail since the Volume can no longer be written.

Maximum Volumes
Type: PINT32

This directive specifies the maximum number of volumes (tapes or files) contained in the pool. This directive is optional, if omitted or set to zero, any number of volumes will be permitted. In general, this directive is useful to ensure that the number of volumes does not become too numerous when using automatic labeling.

Migration High Bytes
Type: SIZE64

This directive specifies the number of bytes in the Pool which will trigger a migration if Selection Type (Dir->Job) = PoolOccupancy has been specified. The fact that the Pool usage goes above this level does not automatically trigger a migration job. However, if a migration job runs and has the PoolOccupancy selection type set, the Migration High Bytes will be applied. Bareos does not currently restrict a pool to have only a single Media Type (Dir->Storage), so you must keep in mind that if you mix Media Types in a Pool, the results may not be what you want, as the Pool count of all bytes will be for all Media Types combined.

Migration Low Bytes
Type: SIZE64

This directive specifies the number of bytes in the Pool which will stop a migration if Selection Type (Dir->Job) = PoolOccupancy has been specified and triggered by more than Migration High Bytes (Dir->Pool) being in the pool. In other words, once a migration job is started with PoolOccupancy migration selection and it determines that there are more than Migration High Bytes, the migration job will continue to run jobs until the number of bytes in the Pool drop to or below Migration Low Bytes.

Migration Time
Type: TIME

If Selection Type (Dir->Job) = PoolTime, the time specified here will be used. If the previous Backup Job or Jobs selected have been in the Pool longer than the specified time, then they will be migrated.

Minimum Block Size
Type: SIZE32

The Minimum Block Size can be defined here to define different block sizes per volume or statically for all volumes at Minimum Block Size (Sd->Device). For details, see chapter Setting Block Sizes.

Name
Required: True NAME

The name of the resource.

The name of the pool.

Next Pool
Type: RES

This directive specifies the pool a Migration or Copy Job and a Virtual Backup Job will write their data too. This directive is required to define the Pool into which the data will be migrated. Without this directive, the migration job will terminate in error.

Pool Type
Type: POOLTYPE Backup

This directive defines the pool type, which corresponds to the type of Job being run. It is required and may be one of the following:

• Backup
• *Archive
• *Cloned
• *Migration
• *Copy
• *Save

Note, only Backup is currently implemented.

Purge Oldest Volume
Type: BOOLEAN no

This directive instructs the Director to search for the oldest used Volume in the Pool when another Volume is requested by the Storage daemon and none are available. The catalog is then purged irrespective of retention periods of all Files and Jobs written to this Volume. The Volume is then recycled and will be used as the next Volume to be written. This directive overrides any Job, File, or Volume retention periods that you may have specified.

This directive can be useful if you have a fixed number of Volumes in the Pool and you want to cycle through them and reusing the oldest one when all Volumes are full, but you don’t want to worry about setting proper retention periods. However, by using this option you risk losing valuable data.

In most cases, you should use Recycle Oldest Volume (Dir->Pool) instead.

Warning

Be aware that Purge Oldest Volume disregards all retention periods. If you have only a single Volume defined and you turn this variable on, that Volume will always be immediately overwritten when it fills! So at a minimum, ensure that you have a decent number of Volumes in your Pool before running any jobs. If you want retention periods to apply do not use this directive.\ We highly recommend against using this directive, because it is sure that some day, Bareos will purge a Volume that contains current data.

Recycle
Type: BOOLEAN yes

This directive specifies whether or not Purged Volumes may be recycled. If it is set to yes and Bareos needs a volume but finds none that are appendable, it will search for and recycle (reuse) Purged Volumes (i.e. volumes with all the Jobs and Files expired and thus deleted from the Catalog). If the Volume is recycled, all previous data written to that Volume will be overwritten. If Recycle is set to no, the Volume will not be recycled, and hence, the data will remain valid. If you want to reuse (re-write) the Volume, and the recycle flag is no (0 in the catalog), you may manually set the recycle flag (update command) for a Volume to be reused.

Please note that the value defined by this directive in the configuration file is the default value used when a Volume is created. Once the volume is created, changing the value in the configuration file will not change what is stored for the Volume. To change the value for an existing Volume you must use the update volume command.

When all Job and File records have been pruned or purged from the catalog for a particular Volume, if that Volume is marked as Append, Full, Used, or Error, it will then be marked as Purged. Only Volumes marked as Purged will be considered to be converted to the Recycled state if the Recycle directive is set to yes.

Recycle Current Volume
Type: BOOLEAN no

If Bareos needs a new Volume, this directive instructs Bareos to Prune the volume respecting the Job and File retention periods. If all Jobs are pruned (i.e. the volume is Purged), then the Volume is recycled and will be used as the next Volume to be written. This directive respects any Job, File, or Volume retention periods that you may have specified.

This directive can be useful if you have: a fixed number of Volumes in the Pool, you want to cycle through them, and you have specified retention periods that prune Volumes before you have cycled through the Volume in the Pool.

However, if you use this directive and have only one Volume in the Pool, you will immediately recycle your Volume if you fill it and Bareos needs another one. Thus your backup will be totally invalid. Please use this directive with care.

Recycle Oldest Volume
Type: BOOLEAN no

This directive instructs the Director to search for the oldest used Volume in the Pool when another Volume is requested by the Storage daemon and none are available. The catalog is then pruned respecting the retention periods of all Files and Jobs written to this Volume. If all Jobs are pruned (i.e. the volume is Purged), then the Volume is recycled and will be used as the next Volume to be written. This directive respects any Job, File, or Volume retention periods that you may have specified.

This directive can be useful if you have a fixed number of Volumes in the Pool and you want to cycle through them and you have specified the correct retention periods.

However, if you use this directive and have only one Volume in the Pool, you will immediately recycle your Volume if you fill it and Bareos needs another one. Thus your backup will be totally invalid. Please use this directive with care.

Recycle Pool
Type: RES

This directive defines to which pool the Volume will be placed (moved) when it is recycled. Without this directive, a Volume will remain in the same pool when it is recycled. With this directive, it can be moved automatically to any existing pool during a recycle. This directive is probably most useful when defined in the Scratch pool, so that volumes will be recycled back into the Scratch pool. For more on the see the Scratch Pool section of this manual.

Although this directive is called RecyclePool, the Volume in question is actually moved from its current pool to the one you specify on this directive when Bareos prunes the Volume and discovers that there are no records left in the catalog and hence marks it as Purged.

Scratch Pool
Type: RES

This directive permits to specify a dedicate Scratch for the current pool. This pool will replace the special pool named Scrach for volume selection. For more information about Scratch see Scratch Pool section of this manual. This is useful when using multiple storage sharing the same mediatype or when you want to dedicate volumes to a particular set of pool.

Storage
Type: RESOURCE_LIST

The Storage directive defines the name of the storage services where you want to backup the FileSet data. For additional details, see the Storage Resource of this manual. The Storage resource may also be specified in the Job resource, but the value, if any, in the Pool resource overrides any value in the Job. This Storage resource definition is not required by either the Job resource or in the Pool, but it must be specified in one or the other. If not configuration error will result. We highly recommend that you define the Storage resource to be used in the Pool rather than elsewhere (job, schedule run, …). Be aware that you theoretically can give a list of storages here but only the first item from the list is actually used for backup and restore jobs.

Use Catalog
Type: BOOLEAN yes

Store information into Catalog. In all pratical use cases, leave this value to its defaults.

Volume Retention
Type: TIME 31536000

The Volume Retention directive defines the length of time that Bareos will keep records associated with the Volume in the Catalog database after the End time of each Job written to the Volume. When this time period expires, and if AutoPrune is set to yes Bareos may prune (remove) Job records that are older than the specified Volume Retention period if it is necessary to free up a Volume. Recycling will not occur until it is absolutely necessary to free up a volume (i.e. no other writable volume exists). All File records associated with pruned Jobs are also pruned. The time may be specified as seconds, minutes, hours, days, weeks, months, quarters, or years. The Volume Retention is applied independently of the Job Retention and the File Retention periods defined in the Client resource. This means that all the retentions periods are applied in turn and that the shorter period is the one that effectively takes precedence. Note, that when the Volume Retention period has been reached, and it is necessary to obtain a new volume, Bareos will prune both the Job and the File records. This pruning could also occur during a status dir command because it uses similar algorithms for finding the next available Volume.

It is important to know that when the Volume Retention period expires, Bareos does not automatically recycle a Volume. It attempts to keep the Volume data intact as long as possible before over writing the Volume.

By defining multiple Pools with different Volume Retention periods, you may effectively have a set of tapes that is recycled weekly, another Pool of tapes that is recycled monthly and so on. However, one must keep in mind that if your Volume Retention period is too short, it may prune the last valid Full backup, and hence until the next Full backup is done, you will not have a complete backup of your system, and in addition, the next Incremental or Differential backup will be promoted to a Full backup. As a consequence, the minimum Volume Retention period should be at twice the interval of your Full backups. This means that if you do a Full backup once a month, the minimum Volume retention period should be two months.

The default Volume retention period is 365 days, and either the default or the value defined by this directive in the bareos-dir.conf file is the default value used when a Volume is created. Once the volume is created, changing the value in the bareos-dir.conf file will not change what is stored for the Volume. To change the value for an existing Volume you must use the update command in the Console.

Volume Use Duration
Type: TIME

The Volume Use Duration directive defines the time period that the Volume can be written beginning from the time of first data write to the Volume. If the time-period specified is zero (the default), the Volume can be written indefinitely. Otherwise, the next time a job runs that wants to access this Volume, and the time period from the first write to the volume (the first Job written) exceeds the time-period-specification, the Volume will be marked Used, which means that no more Jobs can be appended to the Volume, but it may be recycled if recycling is enabled. Once the Volume is recycled, it will be available for use again.

You might use this directive, for example, if you have a Volume used for Incremental backups, and Volumes used for Weekly Full backups. Once the Full backup is done, you will want to use a different Incremental Volume. This can be accomplished by setting the Volume Use Duration for the Incremental Volume to six days. I.e. it will be used for the 6 days following a Full save, then a different Incremental volume will be used. Be careful about setting the duration to short periods such as 23 hours, or you might experience problems of Bareos waiting for a tape over the weekend only to complete the backups Monday morning when an operator mounts a new tape.

Please note that the value defined by this directive in the bareos-dir.conf file is the default value used when a Volume is created. Once the volume is created, changing the value in the bareos-dir.conf file will not change what is stored for the Volume. To change the value for an existing Volume you must use the :ref: update volume <UpdateCommand> command in the Console.

The following is an example of a valid Pool resource definition:

Pool resource example
Pool {
Name = Default
Pool Type = Backup
}


### Scratch Pool¶

In general, you can give your Pools any name you wish, but there is one important restriction: the Pool named Scratch, if it exists behaves like a scratch pool of Volumes in that when Bareos needs a new Volume for writing and it cannot find one, it will look in the Scratch pool, and if it finds an available Volume, it will move it out of the Scratch pool into the Pool currently being used by the job.

## Catalog Resource¶

The Catalog Resource defines what catalog to use for the current job. Currently, Bareos can only handle a single database server (SQLite, MySQL, PostgreSQL) that is defined when configuring Bareos. However, there may be as many Catalogs (databases) defined as you wish. For example, you may want each Client to have its own Catalog database, or you may want backup jobs to use one database and verify or restore jobs to use another database.

Since SQLite is compiled in, it always runs on the same machine as the Director and the database must be directly accessible (mounted) from the Director. However, since both MySQL and PostgreSQL are networked databases, they may reside either on the same machine as the Director or on a different machine on the network. See below for more details.

configuration directive name type of data default value remark
Address (Dir->Catalog) = STRING   alias
DB Address (Dir->Catalog) = STRING
DB Driver (Dir->Catalog) = STRING postgresql
DB Name (Dir->Catalog) = STRING   required
DB Password (Dir->Catalog) = AUTOPASSWORD
DB Port (Dir->Catalog) = PINT32
DB Socket (Dir->Catalog) = STRING
DB User (Dir->Catalog) = STRING
Description (Dir->Catalog) = STRING
Disable Batch Insert (Dir->Catalog) = BOOLEAN no
Exit On Fatal (Dir->Catalog) = BOOLEAN no
Idle Timeout (Dir->Catalog) = PINT32 30
Inc Connections (Dir->Catalog) = PINT32 1
Max Connections (Dir->Catalog) = PINT32 5
Min Connections (Dir->Catalog) = PINT32 1
Multiple Connections (Dir->Catalog) = BIT
Name (Dir->Catalog) = NAME   required
Password (Dir->Catalog) = AUTOPASSWORD   alias
Reconnect (Dir->Catalog) = BOOLEAN yes
User (Dir->Catalog) = STRING   alias
Validate Timeout (Dir->Catalog) = PINT32 120
Address
Type: STRING

This directive is an alias.

Alias for DB Address (Dir->Catalog).

DB Address
Type: STRING

This is the host address of the database server. Normally, you would specify this instead of DB Socket (Dir->Catalog) if the database server is on another machine. In that case, you will also specify DB Port (Dir->Catalog). This directive is used only by MySQL and PostgreSQL and is ignored by SQLite if provided.

DB Driver
Type: STRING postgresql

Selects the database type to use.

DB Name
Required: True STRING

This specifies the name of the database.

DB Password

DB Port
Type: PINT32

This defines the port to be used in conjunction with DB Address (Dir->Catalog) to access the database if it is on another machine. This directive is used only by MySQL and PostgreSQL and is ignored by SQLite if provided.

DB Socket
Type: STRING

This is the name of a socket to use on the local host to connect to the database. This directive is used only by MySQL and is ignored by SQLite. Normally, if neither DB Socket (Dir->Catalog) or DB Address (Dir->Catalog) are specified, MySQL will use the default socket. If the DB Socket is specified, the MySQL server must reside on the same machine as the Director.

DB User
Type: STRING

This specifies what user name to use to log into the database.

Description
Type: STRING
Disable Batch Insert
Type: BOOLEAN no

This directive allows you to override at runtime if the Batch insert should be enabled or disabled. Normally this is determined by querying the database library if it is thread-safe. If you think that disabling Batch insert will make your backup run faster you may disable it using this option and set it to Yes.

Exit On Fatal
Type: BOOLEAN no 15.1.0

Make any fatal error in the connection to the database exit the program

Idle Timeout
Type: PINT32 30

This directive is used by the experimental database pooling functionality. Only use this for non production sites. This sets the idle time after which a database pool should be shrinked.

This directive is used by the experimental database pooling functionality. Only use this for non production sites. This sets the idle time after which a database pool should be shrinked.

Inc Connections
Type: PINT32 1

This directive is used by the experimental database pooling functionality. Only use this for non production sites. This sets the number of connections to add to a database pool when not enough connections are available on the pool anymore.

This directive is used by the experimental database pooling functionality. Only use this for non production sites. This sets the number of connections to add to a database pool when not enough connections are available on the pool anymore.

Max Connections
Type: PINT32 5

This directive is used by the experimental database pooling functionality. Only use this for non production sites. This sets the maximum number of connections to a database to keep in this database pool.

This directive is used by the experimental database pooling functionality. Only use this for non production sites. This sets the maximum number of connections to a database to keep in this database pool.

Min Connections
Type: PINT32 1

This directive is used by the experimental database pooling functionality. Only use this for non production sites. This sets the minimum number of connections to a database to keep in this database pool.

This directive is used by the experimental database pooling functionality. Only use this for non production sites. This sets the minimum number of connections to a database to keep in this database pool.

Multiple Connections
Type: BIT

Not yet implemented.

Name
Required: True NAME

The name of the resource.

The name of the Catalog. No necessary relation to the database server name. This name will be specified in the Client resource directive indicating that all catalog data for that Client is maintained in this Catalog.

Password

This directive is an alias.

Alias for DB Password (Dir->Catalog).

Reconnect
Type: BOOLEAN yes 15.1.0

Try to reconnect a database connection when it is dropped

User
Type: STRING

This directive is an alias.

Alias for DB User (Dir->Catalog).

Validate Timeout
Type: PINT32 120

This directive is used by the experimental database pooling functionality. Only use this for non production sites. This sets the validation timeout after which the database connection is polled to see if its still alive.

This directive is used by the experimental database pooling functionality. Only use this for non production sites. This sets the validation timeout after which the database connection is polled to see if its still alive.

The following is an example of a valid Catalog resource definition:

Catalog Resource for Sqlite
Catalog
{
Name = SQLite
DB Driver = sqlite
DB Name = bareos;
DB User = bareos;
}


or for a Catalog on another machine:

Catalog Resource for remote MySQL
Catalog
{
Name = MySQL
DB Driver = mysql
DB Name = bareos
DB User = bareos
DB Port = 1234
}


## Messages Resource¶

For the details of the Messages Resource, please see the Messages Configuration of this manual.

## Console Resource¶

There are three different kinds of consoles, which the administrator or user can use to interact with the Director. These three kinds of consoles comprise three different security levels.

Default Console
the first console type is an “anonymous” or “default” console, which has full privileges. There is no console resource necessary for this type since the password is specified in the Director’s resource and consequently such consoles do not have a name as defined on a Name directive. Typically you would use it only for administrators.
Named Console

the second type of console, is a “named” console (also called “Restricted Console”) defined within a Console resource in both the Director’s configuration file and in the Console’s configuration file. Both the names and the passwords in these two entries must match much as is the case for Client programs.

This second type of console begins with absolutely no privileges except those explicitly specified in the Director’s Console resource. Thus you can have multiple Consoles with different names and passwords, sort of like multiple users, each with different privileges. As a default, these consoles can do absolutely nothing – no commands whatsoever. You give them privileges or rather access to commands and resources by specifying access control lists in the Director’s Console resource. The ACLs are specified by a directive followed by a list of access names. Examples of this are shown below.

• The third type of console is similar to the above mentioned one in that it requires a Console resource definition in both the Director and the Console. In addition, if the console name, provided on the Name (Dir->Console) directive, is the same as a Client name, that console is permitted to use the SetIP command to change the Address directive in the Director’s client resource to the IP address of the Console. This permits portables or other machines using DHCP (non-fixed IP addresses) to “notify” the Director of their current IP address.

The Console resource is optional and need not be specified. The following directives are permitted within these resources:

configuration directive name type of data default value remark
Catalog ACL (Dir->Console) = ACL
Client ACL (Dir->Console) = ACL
Command ACL (Dir->Console) = ACL
Description (Dir->Console) = STRING
File Set ACL (Dir->Console) = ACL
Job ACL (Dir->Console) = ACL
Name (Dir->Console) = NAME   required
Password (Dir->Console) = AUTOPASSWORD   required
Plugin Options ACL (Dir->Console) = ACL
Pool ACL (Dir->Console) = ACL
Profile (Dir->Console) = RESOURCE_LIST
Schedule ACL (Dir->Console) = ACL
Storage ACL (Dir->Console) = ACL
TLS Allowed CN (Dir->Console) = STRING_LIST
TLS Authenticate (Dir->Console) = BOOLEAN no
TLS CA Certificate Dir (Dir->Console) = DIRECTORY
TLS CA Certificate File (Dir->Console) = DIRECTORY
TLS Certificate (Dir->Console) = DIRECTORY
TLS Certificate Revocation List (Dir->Console) = DIRECTORY
TLS Cipher List (Dir->Console) = DIRECTORY
TLS DH File (Dir->Console) = DIRECTORY
TLS Enable (Dir->Console) = BOOLEAN yes
TLS Key (Dir->Console) = DIRECTORY
TLS Protocol (Dir->Console) = STRING
TLS Require (Dir->Console) = BOOLEAN no
TLS Verify Peer (Dir->Console) = BOOLEAN no
Use Pam Authentication (Dir->Console) = BOOLEAN no
Where ACL (Dir->Console) = ACL
Catalog ACL
Type: ACL

Client ACL
Type: ACL

Command ACL
Type: ACL

Lists the commands, this resource has access to. The special keyword all allows using commands.

Description
Type: STRING
File Set ACL
Type: ACL

Job ACL
Type: ACL

Name
Required: True NAME

The name of the console. This name must match the name specified at the Console client.

Password

Specifies the password that must be supplied for a named Bareos Console to be authorized.

Plugin Options ACL
Type: ACL

Specifies the allowed plugin options. An empty strings allows all Plugin Options.

Pool ACL
Type: ACL

Profile
Type: RESOURCE_LIST 14.2.3

Profiles can be assigned to a Console. ACL are checked until either a deny ACL is found or an allow ACL. First the console ACL is checked then any profile the console is linked to.

One or more Profile names can be assigned to a Console. If an ACL is not defined in the Console, the profiles of the Console will be checked in the order as specified here. The first found ACL will be used. See Profile Resource.

Schedule ACL
Type: ACL

Storage ACL
Type: ACL

TLS Allowed CN
Type: STRING_LIST

“Common Name”s (CNs) of the allowed peer certificates.

TLS Authenticate
Type: BOOLEAN no

Use TLS only to authenticate, not for encryption.

TLS CA Certificate Dir
Type: DIRECTORY

Path of a TLS CA certificate directory.

TLS CA Certificate File
Type: DIRECTORY

Path of a PEM encoded TLS CA certificate(s) file.

TLS Certificate
Type: DIRECTORY

Path of a PEM encoded TLS certificate.

TLS Certificate Revocation List
Type: DIRECTORY

Path of a Certificate Revocation List file.

TLS Cipher List
Type: DIRECTORY

List of valid TLS Ciphers.

TLS DH File
Type: DIRECTORY

Path to PEM encoded Diffie-Hellman parameter file. If this directive is specified, DH key exchange will be used for the ephemeral keying, allowing for forward secrecy of communications.

TLS Enable
Type: BOOLEAN yes

Enable TLS support.

Bareos can be configured to encrypt all its network traffic. See chapter TLS Configuration Directives to see, how the Bareos Director (and the other components) must be configured to use TLS.

TLS Key
Type: DIRECTORY

Path of a PEM encoded private key. It must correspond to the specified “TLS Certificate”.

TLS Protocol
Type: STRING 20.0.0

OpenSSL Configuration: Protocol

TLS Require
Type: BOOLEAN no

Without setting this to yes, Bareos can fall back to use unencrypted connections. Enabling this implicitly sets “TLS Enable = yes”.

TLS Verify Peer
Type: BOOLEAN no

If disabled, all certificates signed by a known CA will be accepted. If enabled, the CN of a certificate must the Address or in the “TLS Allowed CN” list.

Use Pam Authentication
Type: BOOLEAN no 18.2.4

If set to yes, PAM will be used to authenticate the user on this console. Otherwise, only the credentials of this console resource are used for authentication.

Where ACL
Type: ACL

Specifies the base directories, where files could be restored. An empty string allows restores to all directories.

The example at Using Named Consoles shows how to use a console resource for a connection from a client like bconsole.

## User Resource¶

Each user who wants to login using PAM needs a dedicated User Resource in the Bareos Director configuration. The main purpose is to configure ACLs as shown in the table below, they are the same as in the Console Resource and the Profile Resource.

If a user is authenticated with PAM but is not authorized by a user resource, the login will be denied by the Bareos Director.

Refer to chapter Pluggable Authentication Modules (PAM) for details how to configure PAM.

The following table contains all configurable directives in the User Resource:

configuration directive name type of data default value remark
Catalog ACL (Dir->User) = ACL
Client ACL (Dir->User) = ACL
Command ACL (Dir->User) = ACL
Description (Dir->User) = STRING
File Set ACL (Dir->User) = ACL
Job ACL (Dir->User) = ACL
Name (Dir->User) = NAME   required
Plugin Options ACL (Dir->User) = ACL
Pool ACL (Dir->User) = ACL
Profile (Dir->User) = RESOURCE_LIST
Schedule ACL (Dir->User) = ACL
Storage ACL (Dir->User) = ACL
Where ACL (Dir->User) = ACL
Catalog ACL
Type: ACL

Client ACL
Type: ACL

Command ACL
Type: ACL

Lists the commands, this resource has access to. The special keyword all allows using commands.

Description
Type: STRING
File Set ACL
Type: ACL

Job ACL
Type: ACL

Name
Required: True NAME
Plugin Options ACL
Type: ACL

Specifies the allowed plugin options. An empty strings allows all Plugin Options.

Pool ACL
Type: ACL

Profile
Type: RESOURCE_LIST 14.2.3

Profiles can be assigned to a Console. ACL are checked until either a deny ACL is found or an allow ACL. First the console ACL is checked then any profile the console is linked to.

Schedule ACL
Type: ACL

Storage ACL
Type: ACL

Where ACL
Type: ACL

Specifies the base directories, where files could be restored. An empty string allows restores to all directories.

## Profile Resource¶

The Profile Resource defines a set of ACLs. Console Resource can be tight to one or more profiles (Profile (Dir->Console)), making it easier to use a common set of ACLs.

configuration directive name type of data default value remark
Catalog ACL (Dir->Profile) = ACL
Client ACL (Dir->Profile) = ACL
Command ACL (Dir->Profile) = ACL
Description (Dir->Profile) = STRING
File Set ACL (Dir->Profile) = ACL
Job ACL (Dir->Profile) = ACL
Name (Dir->Profile) = NAME   required
Plugin Options ACL (Dir->Profile) = ACL
Pool ACL (Dir->Profile) = ACL
Schedule ACL (Dir->Profile) = ACL
Storage ACL (Dir->Profile) = ACL
Where ACL (Dir->Profile) = ACL
Catalog ACL
Type: ACL

Client ACL
Type: ACL

Command ACL
Type: ACL

Lists the commands, this resource has access to. The special keyword all allows using commands.

Description
Type: STRING

File Set ACL
Type: ACL

Job ACL
Type: ACL

Name
Required: True NAME

The name of the resource.

Plugin Options ACL
Type: ACL

Specifies the allowed plugin options. An empty strings allows all Plugin Options.

Pool ACL
Type: ACL

Schedule ACL
Type: ACL

Storage ACL
Type: ACL

Where ACL
Type: ACL

Specifies the base directories, where files could be restored. An empty string allows restores to all directories.

## Counter Resource¶

The Counter Resource defines a counter variable that can be accessed by variable expansion used for creating Volume labels with the Label Format (Dir->Pool) directive.

configuration directive name type of data default value remark
Catalog (Dir->Counter) = RES
Description (Dir->Counter) = STRING
Maximum (Dir->Counter) = PINT32 2147483647
Minimum (Dir->Counter) = INT32 0
Name (Dir->Counter) = NAME   required
Wrap Counter (Dir->Counter) = RES
Catalog
Type: RES

If this directive is specified, the counter and its values will be saved in the specified catalog. If this directive is not present, the counter will be redefined each time that Bareos is started.

Description
Type: STRING
Maximum
Type: PINT32 2147483647

This is the maximum value value that the counter can have. If not specified or set to zero, the counter can have a maximum value of 2,147,483,648 (2 to the 31 power). When the counter is incremented past this value, it is reset to the Minimum.

Minimum
Type: INT32 0

This specifies the minimum value that the counter can have. It also becomes the default. If not supplied, zero is assumed.

Name
Required: True NAME

The name of the resource.

The name of the Counter. This is the name you will use in the variable expansion to reference the counter value.

Wrap Counter
Type: RES

If this value is specified, when the counter is incremented past the maximum and thus reset to the minimum, the counter specified on the Wrap Counter (Dir->Counter) is incremented. (This is currently not implemented).